Pariah 0 Posted October 27, 2010 I just purchased a Zencut Green cutter, after some initial issues getting it set up I love this thing. I am now having an issue that didn't occur to me before. I need to cut 2 items that are 10" by 10" side by side. Should be no issue placing them side by side to cut. I can not seem to get the home position of the blade to move any closer to the right (as you face the machine) than 6". I have gone through the steps while it is in offline mode to adjust the home position but when it sees "0" it will not move any further. This is beginning to aggrevate me Any help would be greatly appreciated!!! Share this post Link to post Share on other sites
mr300s 1,272 Posted October 27, 2010 sorry dont know anything about that machine but do you have the roller pullled over all the way to the right? Share this post Link to post Share on other sites
Pariah 0 Posted October 27, 2010 Oh brother.... All the concern because it is a new machine and I completely over look the obvious. How about feeling dumb. Thank you for pointing out my error and not slapping me along side the head Share this post Link to post Share on other sites
