Error with SCx2 and Refine 721

[West Wood 0]

Hopefully someone out there has seen this before.  I have been cutting with no major issues today.  When I went to make my twentieth cut of the day, all of a sudden my cutter won't cut.  Signcut is only asking me how I want to save my work when I click "cut out".  Any suggestions?

[wg_kjell 0]

Hello,

Probably there was a communication-error, and in order to prevent from system-crash the program changed to

"Write to file" as device. To solve this, click on Cutter in the top-panel to open the cutter-dialogue and

then change "Device" to the communication-port you used earlier.

If you download the latest version of SignCut-X2, this shouldn't happen anymore as we have changed that

behaviour.

[West Wood 0]

Thanks, were can I find the download?  I just purchased SignCut in the last month. 

[Judd 0]

On the home page, go down to signcut and open then read first sticky, it will tell you what you need to know :glasses2:

[kenimes 42]

http://uscutter.com/index.php?option=com_docman&task=cat_view&gid=9&Itemid=5

It is the top selection SignCut 2.17