lablover

Prayers to the Family. Rest in Peace my Marine Brother!

Thats sort of what i end up doing...

LOL..Join the club. Only thing I can think of is the strip is not as thick on that end..It's not the end of the world honestly but a tiny pain in the butt. I'm usually using 15" so it may have been like this all along? My thought anyway

The cutting strip is pretty much un touched.

So, my Graphtec has been chugging along pretty good but now is starting to act up a bit. First issue is when I have a design and tell Cutmaster to repeat the cut design several times. si I have it use the entire length of my Vinyl The last design to the far left of the cutter is the hardest to weed...seems like I'm not getting complete cut thru the Vinyl. It also has some issues of the design being a bit jagged on some lines. Replaced the blade to a new Clean Cut 60 deg blade. The design is pretty detailed and smallish and it only really happens on the last design on the width of the vinyl. So, the last one all the way on the left side of the cutter. Say I had 5 in a row, the last one cut on the left is the worse. Clear as mud right? >>>LOL I've been using my cutter pretty hard so not sure anything needs asjusting etc. Look forward to any ideas BTW 24" vinyl Thank all Joe

Time is Money Right now I have more time than Money so it's a wash. I'm still thinking of bitting the bullet on this because I hate the tape up after I layout the design on the glass...What a PIA. doesn't take too long but ugggg I hate it for some reason. I watched a few videos and they seem to blast at 30psi..Seems pretty tame to me. I blast at 90 psi and that makes just a nice frosting. I'm trying to find a blast gun like the had in the video..Pretty slick and accurate.

Yup And then promptly forgot them the day after...But yea, I wish I would of invested then...

My current pricing retail would not really allow me to use this Rayzist. Wow, that paper and film aint cheap. I'm curious how I could raise my price to use this without everyone going nuts. Rayzist is saying roughly 1.00 per square inch. My design is 5x5 and I'm getting 15.00 for a mug. With vinyl that pretty good cause vinyl is cheap. I'd have to charge 25.00 per mug which I'm sure they would pay but not the Large firm I'm talking about. I'll tell you what, it sure would save a butt load of time I wish I would not have looked at it..It sure is the cats A$$

AWESOME!!!!!!!!

WOW I need to give this a try. Yup, I can see adding Rock glasses to the collection now.... THANKS ARTY!!! Joe

I'd be game for some as well.

I actually need to get with you about my design on small rock glasses. I can't cut and weed that small without using a ton of time.

WOW Get into Lasers....

So, it finally happened and I'm over the moon excited...I know..to early to get excited but its exciting non the less... anyway One of my SandBlasted beer mug designs just got noticed by a good size company in the shooters community. They are very well respected by about 99% of the shooting community. Anyway, its for a sandblasted design I do on a Beer mug. Some details The mug I get from the dollar store. After cutting a template etc I have maybe 1.10 in materials. I normally sell these to guys at 14-17 dollars. This Retail outlet wants me to put together a price for them...Gotta say, I'm at a loss. I know they want a better price than I'm doing now so they can obviously make a profit themselves.. Where in the world do I start !! I want an attractive price for them but also want to make sure I don't loose money myself. Honestly I never thought I would be approved with this but it happened and I'm "GEEKED" Can anyone set me on the right path. The good thing is they are also all over any new ideas I have as well...I already have a few in the works. HELP I habe to say......Fellin pretty good right now Side note Can lets say objects like Beer mugs be done via Laser? Not sure if thats only a flat surface thing....Looking for Go C advise here

So, Business has been getting pretty good and I think its time for an upgrade Was thinking of a Hot tronix Fusion 16x20 Fir those that own one..Did you think it was the right choice? I like the pull out table. Is it accurate temp wise What can you tell me about this to me seems caddy