kpsxtyone

thanks for trying

Hi, Anyone have an idea what font this is? Schumacher Thanks !

Hi, I have a wheel i need help to vectorize. I am using Illustrator trace path but it looks all weird. Any tips is appreciated. It doesnt have to look exactly the same but would like the effect of the twin spoke. No tires needed just the wheel Here is the picture. ( i have high resolution available) Thanks in advance!

thanks so much !! Just upgraded to a used CE5000 and I am loving it

Hi, I would like to know if anyone can help me on how to set the program to automatically set the weed line/box? with signcut it has a check mark to enable the weed box after each cut. Is there something similar to this for cutmaster? Thanks!

I tried grounding the cutter and using a keyspan with same results.. Any other ideas ? thanks, Ryan

settings

Hi, I have successfully done a contour cut using the 3 registration mark way but after the final cut it will cut across back to the origin instead of the blade lifting. I have attached a picture to better explain. (I had to draw a line using a marker for better visibility) I am using an Imac with Sign Cut Pro. Cutting vinyl is fine its just when it comes to the last object of the cut. Thanks, Ryan

Hi, I got the cutter for just over 6 months now. It has been great till i used it again after a month of idle. I normally cut at 70 with pressure of 130 on a 45 degree blade for simple outline decals. When i tried cutting with the same file it the end cut are not matching. I have to cut it at 50 and it will work just fine. This also affected contour cutting. for a 8 x 11 paper with say 6 circles (2 columns x 3 rows). The ones closest to the front of the cutter are perfect middle is a bit off then the last one is not acceptable. I was wondering if the motor, gears, belts need replacing after say... 100 hours of work?(with in a span of 5 months). Do i take it apart lubricate the bearings and double check any clearance? Thanks, Ryan

thank you !

Hi, I was looking for a vinyl that i can iron on to the shirt so it stays. My plan was to make few shirts with a simple blue logo on it. is there such a thing? Thanks !

After getting it to cut i now face a new problem. With the first cut it seems that the outer line is shifted. the 1/3 of the decal was close to perfect and once it goes to the remaining 1/3 the outline is shifted. I have attached a picture. First one was cut while in win 7 and next was with the mac. Anyone experienced this before? thanks !

tech support from USCutters sent me the drivers and it now works great! Thank you USCutter support team!

ahh gotcha! I got the mac sofware for signcut pro with the help of their tech support. They mentioned that i need to get the drivers from the manufacturer so i also opened a ticket with uscutter. Thanks !

does that mean that the usb connection from the cutter is no longer compatible to the usb plug of the imac?