busterbay

Who is the current manufacture of Greenstar CV1 vinyl ? I know at one time it was China, the it was General Formulations, it appears it has changed again. I want to make sure the colors match before I stock up for the season.

I did, the answer was unclear that is why I posted here. My recent 50yd roll of white came with a white backer... not user friendly at all. I've been getting blue back for the past 5+ years

Does anyone know or can they confirm if the Titan 1 control panel will work on the Titan 2 ? I pinched my display cable(s) while changing the mother board & belt. So only part of my display works as with only half the controls.. But UScutter doesn't have any in stock for the titan2.

** follow-up *** UScutter CS responded the next day.. and yes the keypads are the same on the titans

Yes, but no answer. but I did look on the Saga website ( the maker of the Titan) and it indicates that all they keypads are the same so I got my answer.

What happened to all-silhouettes.com ? I haven't visited the site in over a year I tired to go there today and it's completely gone.

Feel free to spread the Christmas Joy Christmas Village.svg -

I've had the old SC "1" in the past and it never contour cut correctly. So since I have owned a few Titan II's. I'm in the need of a dedicated machine just to contour cut. So My question is the folks that own an SC2 what are your thoughts on the machine ? Do you find it accurate for contour cutting ?

In my case yes it's trying to cut a thick line or the fill and the line. I don't think that is the ops issue though.

Also make sure you didn't accidently turn multi cut on in the cut settings. Make sure it's set to off.

I use Corel and SCALP I often will get double lines from corel or if I forget to change the line to none when in design mode when making my SVG. What I do in SCALP to correct this is union the object, It works like a charm. I've attached a screen print.

Sorry, I'm not exactly sure. I found it on my local drives. I'm guessing It came with a software install, it has a cryptic name it starts with @DF at the beginning then looks to be several foreign letters . I don't know if it is copyrighted so I won't upload it.

Anyone know what font this is ?

Thanks, I found a similar font I just add in the swirls as needed. I made a decal for our laundry room.

I've seen it several times and it all looks similar so that leads me to believe it is a font.

This isn't free http://www.firstcutfilm.com/paint-protection-kits.html they have a sample page it may be enough to get you started

I did some digging the website owner if from Russia, Dreamhost hosted all-silhouettes. Godaddy one of the other ones. The owner had a few other sites they are all non operational. https://website.informer.com/Stanislav+Novoydarskiy.html A couple of the other sites associated with the owner present or past that are operational appear to have hacks/ crack info on them. If I were to guess since the silhouettes & other vector sites they had didn't contain spyware that I ever detected, I'd assume they were hacked and shut down by the provider. I have a few sites hosted at Dreamhost and a rouge plugin allowed access to one of my sites. Dreamhost was quick to isolate it and shut it down. Or they were not making any money and closed things up. Just a couple of guess since I don't read Russian.

All the links go back to all-silhouettes.com

Or maybe not none of the download links work.

Maybe they were bought out then. that may explain why they are gone. I think Freepix is owned by shutterstock.

That maybe but that wasn't the question, I'm not seeing the website all-silhouettes.com . From what I found on the Wayback Machine it looks like it went missing sometime late last year. I'm just curious as to what happened to them.

A customer sent me this I'm pretty sure it's a marvel char or similar so I will decline. Looks familiar but I'm not sure of the name. Suggestions ?

They were very vague when they first contacted me that is why I posted the picture . After questioning them a bit they said they had a local artist make it for them. They didn't offer this information early on which made me suspicious.. I did also several searches after I posted it and it didn't return any results. I guess the next step would be for them to sign a release and move forward.

I have done it in SCALP but never tried inkscape. Buy a Titan they are much quieter and more accurate on long runs.

I restarted my PC and still could only click on the tabs 2 times before it started taking me to the landing page. Send me a message if you need anything else. 20180118_195323.mp4