providence

Members
  • Content Count

    3
  • Joined

  • Last visited

    Never

Community Reputation

0 Neutral

About providence

  • Rank
    Newbie
  • Birthday 01/01/1

Profile Information

  • Gender
    Not Telling
  1. providence

    Advice to lay 14 ft.

    that helped thanks!
  2. I have a graphtec CE5000 I generally just laid the roll onto the two rolling bars on the back to do cuts. But recently I have been doing huge cuts, and mistakenly had the speed to high so when the roll spun it gained momentum and it kicked the roll off. SO is that how you are sapposed to use the rollers on the back? or Do I put the bar into the vinyl tube? and what are the plastic clamps for? sorry I lost my owners manual...
  3. providence

    Advice to lay 14 ft.

    Any advice, doing my first lay this size... 17 in tall by 14 ft wide peice of reflective vinyl onto a huge utility truck. Anyone done a lay like this before? my partner and I are going to have to be on ladders to reach the space. My best ides thus far was to hold the peice up to the truck, level it, and tape verticle in half, then on the right side across the top tape it to secure it, then fold over the vinyl to the middle, peel it off the backing and cut the paper and try to lay that 7ft peice in one go. I am not sure how this is going to work. If anyone has done a lay like this before, let me know how you did it. The two things I am trying to avoid is seaming it, or having to build a makeshift scaffold.... p.s. It's reverse weed, so I cannot just lay it in sections (unless I take a shot at seaming it.)