galaxygraphics

Members
  • Content Count

    143
  • Joined

  • Last visited

Everything posted by galaxygraphics

  1. galaxygraphics

    Devils horns

    I'm looking for some devils horns. I have a job that requires a halo hanging on a set of devils horns, and can't find them anywhere I have looked, so far! Any body got any they would be willing to share? Thanks in advance for any help! Have a gret week!!!
  2. galaxygraphics

    Help converting to Vector

    Can someone please help me convert this? I gotta have a few of these! nobody cares.htm
  3. galaxygraphics

    Have I met the limits of my LPII

    There are 2 pinch rollers at the top of the blade carriage, under the "lid", that got loose, on MY LPII, and it did the same thing. Lift the lid, and look at the thumb screws, and see if they are loose, or as in MY case, one of them had actually fallen OFF! I tightened those up, and it works like new!
  4. galaxygraphics

    Help converting to Vector

    It won't load. But thanks, anyway! I'll work on it, and see what I can do. It is an HTM file, and I can't get SCALP4 to open it. nobody cares.htm
  5. galaxygraphics

    2008-2015 F-150 Template

    A wrap template? Window tint? Specifically what kind of template?
  6. galaxygraphics

    Memphis TN bridge

    That is SWEET! Good job!
  7. galaxygraphics

    Caps,

    I need some one to cut and apply a vector on some baseball caps. I have the vector, and need it in hunter orange. I had someone that did them for me, but for whatever reason, they refuse to answer my calls. I will supply the caps, and the vector, all I need is cut, and applied! Thank you, in advance, for your assistance!
  8. galaxygraphics

    Caps

    I am looking for someone to do about 3 dozen caps. I have the vector, and will have the caps shipped to your location. Of course, I will pay all shipping. My name is Jim, and my number is 870--351-1217. I had someone that WAS doing them, but apparently, they aren't interested, or are no longer in business! Thanks in advance, for any help!
  9. galaxygraphics

    Units of measurement

    Can anybody tell me why my measurement units are in MM? No matter what I do, when I change it to inches, when I start using it, it ALWAYS converts back to MM. Everything was working fine, the last time I used it, but this time, it opened up in MM, and I can't change it! Any suggestions, at all? Thanks in advance for your time and effort! Have a Happy Thanksgiving!!!
  10. galaxygraphics

    Sublimated Softball Jerseys

    Sweet!
  11. galaxygraphics

    Caps

    I need a dozen caps ran. I don't care if it is Chromablast, or HTV. I can supply the caps, and I have (own) the copyright. I have it in vector format, and it is ready to cut, or print. Text only, no graphic, single color. (hunter orange font, on a camo cap) Thanks in advance for any help! Have a good week! Jim @ 870-351-1217
  12. galaxygraphics

    outlines.

    Can anyone tell me how to do this? Also, what is this font, if anyone knows. Thanks in advance for any help!!!
  13. galaxygraphics

    outlines.

    Thank you everyone! I have a few good days, and a few bad ones. But, I have great back up! I really do appreciate everyone being so patient. I guess this was a childish, or rookie question, but I couldn't remember the answer! But I got it now!!! Thanks, again!
  14. galaxygraphics

    outlines.

    That's what I say, Dakota. Since my TIA's, I can't remember much, and it seems to be getting worse!
  15. galaxygraphics

    outlines.

    I tried SCALP, but not much there, I am on my way to inkscape, and stopped in here! Thanks guy, and gals! all of ya are great!
  16. galaxygraphics

    What I've been up to...

    Would/could you share the "walking" file? Or, if you'd rather would you sell a white one? I'm not a fan, but my baby sister really is!
  17. galaxygraphics

    HTV on a Tent

    I would use a Teflon sheet, and maybe do 10 seconds?
  18. galaxygraphics

    Devils horns

    Thank you OW Jones! You are a friend indeed!!!
  19. galaxygraphics

    Ricoh Printer

    If I am wrong, please forgive me, but I believe Chromablast, and Sublimation is about the same thing, or close, isn't it? Anyway, I have two Ricoh printers, one set up for Sub, the other set up for Chromablast. They were in an office, when I went away for a while (no NOT jail!). The air conditioning was turned off, as well as the electricity. My question is, is there ANY way to clean the ink tubes out, or even replace them, or are the printers destroyed? Any help, or advise any one could offer, would be greatly appreciated! Thank you, in advance for your help, and info! BTW, the temp was generally in excess of 90 degrees, and this has lasted for more than 45 days. I would guess that probably matters!
  20. galaxygraphics

    My Truck Rear Window

    There are two pieces missing between the left and right! But, it looks good, nonetheless!!!
  21. galaxygraphics

    Ricoh Printer

    Sorry, I fooled around and got busy!!! I do understand the difference between the two inks, in my opening statement, I was referring to the placement of the post, I should have been clearer! OW Jones, I tried to get the printer to clean, but since the ink was dried up, it wouldn't do anything! 'Magine that! I was hoping to maybe do something to perhaps ensure it worked, before opening that high dollar ink! But, oh well, here goes $275.00 or so, in ink!! Hope for the best, but expect the worse! Thanks everyone for the input! Have a wonderful week!
  22. galaxygraphics

    Western themed font

    I am looking for a "western" themed (I'm pretty sure themed is a word!) font. I have tried Trocadero, but it needs to be "cleaned up", and I have NO clue how to do that. I have tried, and I have looked at the videos on You tube, and all that. I am just not bright enough to grasp it! Any help, would be greatly appreciated! Thanks AGAIN, in advance!!!
  23. galaxygraphics

    Rosewood

    Does anyone have a rosewood font file they would be willing to send me? I had it, but somehow, it and a bunch more fonts are now missing. Thank you, in advance for any help.
  24. galaxygraphics

    Rosewood

    Yes, I found it, thank you!
  25. galaxygraphics

    My first big wall and door...

    Awsome!