-
Content Count
33 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by NichoDesign
-
MAN AM I GLAD I HAD A EXTERNAL HARDDRIVE!!!
NichoDesign replied to Dawn's Design's topic in Off Topic Section
Laptops, desktops, external drives all fail, now these days unless you buy quality drive are only insured for 1-2 years vs, 5 like they used to. Either buy a good NAS like Synology, or Qnap and many others or now you can fork out 2.99$/month for 100 gigs of cloud storage via GoogleDrive that supports versioning like DropBox, I have all 3 and eventually merging to local cloud and only use the internet cloud to store encrpt. content I have locally. That saved me numerous times. -
But will someone post the vinyl code so some of us that are interested can buy some from this site if any, I did found very similar at reasonable price so I guess if you can't find it here try ebay.
-
The only one that comes close to that in Oracal is the Films Specialty one SERIES 383 / 003 Gold Gloss, Unless is part of the starter kit metallic films 004 / Polychrome Gold Brilliant but I cannot see the details or texture on it.
-
MH 871-MK2 Cutting issues
NichoDesign replied to noreason's topic in USCutter Refine Cutting Plotter Support Requests
I made sure middle roller is not in center over metal non moving parts, but I will def. get a 60 degree blade and SCALP software to do a test run @ ie .025, as you can see or tried .4 to .2 big difference and wondering what gives me @ 0.05 or even 0.025 I think i cam to conclusion that it will do its job regardless, wondered about the cutting part for fancy vinyl like Oracal 975 Textured Cast Graphite Metallic (932) -
Very informative, I do keep the center roll off and I think when I print logos, and other designs, it is sufficient in quality and for a starter. I already printed some stickers and eager to try out the Oracal 7xx series for the more quality stickers I want. What about the knifes, I can upgrade the knifes to the better quality ones and want to find out if it really makes a difference. I also wonder how you find out when it is time to replace it. I think mine ran off the vinyl once or twice onto the white plastic a little bit will that suffice a replacement? It cuts okay for now and got 2 backups. I also want to note that I sure got a lot of cool stuff for 300$ bucks including shipping and all the extra vinyl. But I think USCutter is thinking differently, like some of the smart cellular manuf. out there. We give out the cutter at cost or marginal profit but we get them for life-long client as a client for vinyl and accessories. I just received one order in and catalogs of vinyl and I'm already planning to order whole bunch more.
-
Great idea! with the leaf effect, I will def. check and see/purchase some as well.
-
I use a local dealer here and gives me a very good price 4-8$/sq. ft depending on which canvas and I must say when I print 66x60 the price is just right and compared to your other online vendors I get it at 1/3 price. All I can suggest is check with local vendor and make a relationship worth keeping and use them if possible.
-
Pardon the question but what do you use it for? Just curious, when it comes to vinyl, cutters, or this related site.
-
For a second I thought it was vinyl and with sand blasting. That's another option but this is a great idea and looks great!
-
MH 871-MK2 Cutting issues
NichoDesign replied to noreason's topic in USCutter Refine Cutting Plotter Support Requests
My middle roller I don't use at all if I do my vinyl will cur up and cause it to raise and knife goes crazy. Support told me to leave it off, my off-set is a nightmare, playing with 0.25, .28, .30 my Ts and Es are messy.. I would be happy if I can get it right on and deal with the middle roller. Out of the question to use 34' inch vinyl. I printed few samples using various offset and still not the quality I want. I am wondering if I should have thrown extra 200-300 bucks and get a better one. The attachment doesn't look good/detailed I included the google drive high res images and video here. -
I just got a MH871 and support said to leave middle roller up and just use 1st stationary one and the last one. Is that a normal operation, if so, why did they include the 3rd one. If I leave all 3 down, no matter how I feed it, how long the vinyl or short it is, I get kinks, or slack. I've got video and submitted along with my trouble ticket, but the response was less than expected, wonder if I should return it and get a better quality one. I wasted most of my sample vinyl on getting the off-set correct because my Ts, Es, and such are not straight when using ie. Arial Black.
-
MH871 Issues...
NichoDesign replied to TVW's topic in USCutter Refine Cutting Plotter Support Requests
I think I got it just right with the offset and such. I am not sure if it is normal to have the middle roller as in picture rised and not pressed down because it creates more headaches. I am using the 'freebie' vinyl received with the cutter and I might have few feet in the rear and not much effort for the printer. As for Blade Offset: thank you, tried drastic changes from original 0.50 to 0.1 and as you cna see in "test" cuts made it worse and settled for 0.25. Back to the rollers, the right one closest to reset button is stationary and does not move, middle one easiy moves back and forth once it is raised. The left one is slightly tougher to move back and forth but doubt that causes it, and there are adjusters in the back. Testing with two rollers down and the middle up seems to work okay and not sure if it is very imporant to have them all 3 down because I am cutting 24" and not 34" vinyl (width). Thanks for the help once again. p.s. there will be once in awhile a tiny extra vinyl on a design that might need to be trimmed with the exacto knife. -
MH871 Issues...
NichoDesign replied to TVW's topic in USCutter Refine Cutting Plotter Support Requests
That sort of fixed it, right now I am battling the feeder a little, it creats slack or not being fed right and creats part of the vinyl to rise or be pressed down and seems that the knife might have a harder time cutting, as it prints I would rise one of the 2 rollers up to let go of slack but doubt that's normal. Might be the quality of vinyl, not sure. -
MH871 Issues...
NichoDesign replied to TVW's topic in USCutter Refine Cutting Plotter Support Requests
I just got my 871 MK2 and I have similar issue, I have the speed set under 500ms and pressure to about 100-130. I have attached some photos. Picture 1 - this is a test you can see the square 'period' above 'is' is not square nor the "test" where the "t's should be more square cut. Picture 3, - House, should be straight lines or squared windows. I need some feedback and to see if I can get it to work via soft or settings of printer before I use the "Feed roller repair instructions" process to open up and start messing with insides. -
New GraphTec CE-6000 24/40/60/120 Any Info on it?
NichoDesign posted a topic in GraphTec Cutting Plotter Discussion
Sorry to double post again but I accidently posted this in Request Customer Support Forum instead of Discussion. I was in the market to buy a 5000 when I noticed a 6000 in the wild and not much info on it or specs.. GraphTec site doesn't list it either. -
I purchased one on ebay for 45$, it was crap, made out of wood, it was a single color, I think I threw it away Yours looks a lot better/professional.
-
That's a great idea, why didn't I think of it, much easier to read. I have saved up a bit of money and didn't know what to blow it on either. I figured photography is a bit too expensive for me and will eventually get into signage. I'll start giving out free stickers and free signage to practice on and get my name out there, after I'll have to under price everyone else, and after raise my price as business grows. If I win the lotto I'll get me a VersaUV LEJ Hybrid UV-LED Flatbed Inkjet Printer or a VersaUV LEC Series UV Printer/Cutters and I'll just sit home all day and design/print free posters and stickers all day.. too bad I don't believe in the lotto nor do I play it.
-
Ebay versus online store
NichoDesign replied to midage32065's topic in USCutter Equipment Feedback or Suggestions
I always do research and read comments/reviews on Amazon and after buy on eBay. I think buying something on eBay and not get what you want you have a better chance of getting your money back via PayPal and such. My biggest thing is that I can leave a NEGATIVE feedback if product is not as advertised. You cannot do that on Online Stores where other buyers can view/read comments or feedback. If they sell junk they will not last long on ebay unless they sell 20k items/month. There is no reason not to buy on eBay, just use common sense and caution. There were many times I can buy directly from another online-store, distributor or manufacturer for a lot less which I have done. -
New GraphTec CE-6000 40/60/120-amo Series
NichoDesign replied to NichoDesign's topic in GraphTec Cutting Plotter Support Requests
Yup my bad, I couldn't delete this post, I tried to edit it as well and remove everything onit, there's another one in the discussion forum, vs the help request (this one).- 3 replies
-
- graphtec
- graphtec 5000
-
(and 4 more)
Tagged with:
-
New GraphTec CE-6000 40/60/120-amo Series
NichoDesign posted a topic in GraphTec Cutting Plotter Support Requests
I decided to buy a GraphTec ce5000-60 but just noticed today that there is a new cutter out there in the wild? The GraphTec ce6000! I checked the GraphTec site and couldn't find it. I did notice a small design change where the buttons and such are top, right vs to the side (right). Anyone have any specs or input on this. I'll hold off for a month or two before I'm buying. Hope it has better specs than 5000 because the price is about/is the same. I found the specs, plus I emailed GraphTec and they got to me with an email asking me where I lived so they can have the proper person contact me.- 3 replies
-
- 1
-
- graphtec
- graphtec 5000
-
(and 4 more)
Tagged with:
-
Hmm, how did I miss that, I think 15x15 is enough for a starter, or I might've been locked on a 16+ which I measured a shirt I got on and that I have printed via a site and 15x15 is more than enough for me at this moment.
-
The only swing away press I see they have is the: Economy 9" x 12" Swing-arm Heat Press - 110v, at about $150.00 bucks, is that the one you have. I figured if I can multi press in 2 parts, that should be fine and a good investment. Wish they made a 12 x 12 or similar.
-
If you use Corel or Draw alot I suggest using a Wacom Tablet or similar, you can fetch on used on ebay for very cheap. You would also like Corel X6 where it has lots of new features to make work easier. Check YouTube for X6 new features. I keep jumping back to Corel out of Illustrator because I work much faster in it I have noticed.
-
I would do the same, someone that has done this might chime in, but when I did print and not on vinyl I would do this and if I had a cutter, I would not send to printer but instead print to PDF and you get your separation. Or take the 3-4 color vector and spread it on 3-4 pages, and align appropriate to either align or save vinyl.
-
How do I create an entire sheet of the same decal?
NichoDesign replied to Blazinbones's topic in Corel Draw
I've been meaning to post, the way I have been doing it (not relating to cutting) but making aligned multiple copies verticle & horizontal and have equal spacing was using the "Transformation" tool... (Windows -> Dockers -> Transofrmation -> Any will work, Position, Rotate, Scale/Mirror). That gives me the Position (Alt F7) and click on the 5-6 copies with x space and or y space and copy it 3-4 times across and 3-4 down.. I must say that the Edit->Step/Repeat is a much better option now that I look at it, for 2-3 copies I have the Deck on my right the Transform...