Danieve

Members
  • Content Count

    19
  • Joined

  • Last visited

    Never

Community Reputation

0 Neutral

About Danieve

  • Rank
    Member
  • Birthday 01/01/1

Profile Information

  • Gender
    Female
  • Location
    California
  1. I actually line up my material with the sticker that came on the front of the cutter (cheater, huh?). I've learned the hard way to always zero out before going back on-line, but as soon as I hit cut it still rolls the vinyl backwards and hits the kill switch. Any more ideas out there? Also, is Sign Cut Productivity Pro different from Sign-cut x2? I do all my design in Illustrator and just use sign-cut to send it to the cutter. Anxiety attack coming soon!
  2. US Cutter US Cutter Laserpoint 24 Radio Shack USB to Serial Cable (com 5)
  3. I had to wipe out my laptop so now I have to re-install my Laserpoint. I remember having issues when I initially set it up, but I wasn't smart enough to do screen prints of everything so I could get all the settings correct. I've tried both the USB cable and the serial adapter (which is what I usually use with it). I have a Windows XP laptop & use sign-cut X2 (which has already been re-installed on the system). I've finally gotten it to talk to my laptop (I think) but it keeps hitting the red stop button on the right. I'm totally stressing out as I use my cutter trackside & have a big event this weekend. Any suggestions will be greatly appreciated. Thanks!
  4. Thank You. I finally got it to work. Now I know just how many issues the 1st one had!
  5. Hi, I've been using Eco-film heat transfer vinyl for shirts, sweatshirts, etc. When I ordered it I asked about bleed thru because I plan on doing alot of motocross & other jerseys. I was told it would not be a problem. Well, that isn't the case. I just put a name and number on a customers new fox jersey (the wild one with the yellow/pink/blue/white/black) colors in it. He wanted hot pink so I did it & the colors bled thru so bad you could hardly see the pink vinyl. I tried putting another layer over the top but of course it did not place exactly in spots when I put the press on it. ARGH!!! I'm at a loss & afraid I'm going to have to buy a new jersey for him. Can you please suggest a better vinyl to use? Is there a way to remove the vinyl from the jersey (or other items) ? HELP!!!!! The newbie feels like she fallen in the well!
  6. Hello, I just got my replacement cutter as the 1st one I rec'd had several issues and had to be replaced. For whatever reason I cannot get the new one to talk to my computer. I have windows XP, Signcut X2, and laserpoint 24", comnected via serial cable as the last cutter wouldn't work with the usb cable. I've done a test cut on the machine and it seems to work fine, but I can't get anything to cut when sent from the software. I'm at a loss & could really use some help. I've attached a printscreen of how the cutter is set up in the device manager. Thanks in advance! printscreen of cutter setup.pdf printscreen of cutter setup.pdf
  7. Danieve

    Vinyl off tracking

    Thanks, I'll give you a call in a few minutes.
  8. Danieve

    Vinyl off tracking

    What do I need to do to get a replacement unit? I've got several orders that need to go out & I can't do them without this machine. Is it possible to have a hold on my credit card so a replacement can be sent out & then be credited when you receive the machine I have now? Please let me know ASAP as this is not a good time for me to be without my cutter!
  9. Danieve

    Vinyl off tracking

    yes, both are in the locked position. Is it common for these machines to take forever (sometimes more than 5 minutes) to start once the power button is turned on?
  10. Danieve

    Vinyl off tracking

    The left wheel (if facing the machine) did not feed the paper strip at all. I did have a problem with it bunching up the heat transfer vinyl a few times. I just wrotre it off as user error but it would be in he middle or end of the job. This machine also takes a very long time to start once it's been turned on.
  11. Danieve

    Laser 24 Manual

    please send to: danielle@gobiggraphix.com Thank You! If you have something on SigncutX2 that would also be appreciated!
  12. Danieve

    Vinyl off tracking

    I have a 24" laserpoint. I tried to cut 4' of text on Oracal 651 vinyl and had major problems. The left roller didn't want to feed/roll the vinyl. I tried to line the vinyl up completely on the right side to keep it straight but that didn't work either. I looked at the rollers and they seem to be fine so I'm not sure what the problem is. It seems to work fine with the heat transfer vinyl but is having problems with the thicker vinyl (and longer runs). Any ideas or suggestions?
  13. I've got a call & e-mail in to tech support. I bought a serial adapter yesterday & was finally able to make a few cuts, although I'm still not exactly sure how I did it! Is there a way to just cut from Illustrator withouth iusing SBE or another program? I want to do jersey lettering in 2 colors. Maybe someone can tell me how to do this in SBE? I'll be home around 3:15 today so maybe I can get ahold of tech support then.
  14. Danieve

    Laser 24 Manual

    any sign of the manual yet?
  15. The cutter finally came to life, but it sure takes a long time from turn on to do it! I was able to cut a test square, but cannot get my laptop to send anyhting to be cut. I kept getting an error until I tried a few different ports. Then it finally said it was sending to the cutter, but nothing ever happened. Should I invest in a keyspan to see if not using the USB makes a difference? What are the chances that someone has written up some very basic instructions for us newbies? I have to work tomorrow but should be home around 3ish PST. Can I call to have someone walk me through the set-up/installation process at UScutter? I'm not sure if I should get a different software package to make my life easier or not. What other program works with the laserpoint? Maybe I should change my name to '2 many questions"