elitterate

It will let me post a screen cap of the file though. The KTM comes out super deep. Whole top line is okay. Ring image is salvageable with a blade. Keep calm has only 1 'E' that I can get out. The 'and' and the 'I' aren't even visible.

Oops, sorry it won't let me post the picture.

Thsi is what it looks like when I try and weed it. The letter after the 'U' should be an 'H'. Only the top cut. The bottom didn't cut through at all. It just happens in random spots. I did 60 ants for my baby girl's birthday party and probalbly only 20 cut so that they would weed perfectly. 10-15 cut most of the way and just needed an knife to help in some spots and the rest were just a simple light scratch on the vinyl.

I don't have that program. Can I get it off UScutter sight?

Done. Blade length is fine, the problem is that the machine is picking and choosing what it will cut. I had a problem with it only cutting one letter of an entire word. I checked my blade and tried to recut. Same problem. Only some areas are cut, some are just touched and some have nothing at all. After consulting with this forum I added another image to the design. Only that image cut, none of the text or other image from before. (some of it was glanced over, but not weedable) I am almost sure it is not the blade. I think it is either my machine or it is the pressure.

Added a new image and recut. None of my previouse text cut through the vinyl all of the way, but the new image cut through. It almost cut through the whole backing but only where the new image was. What is happening?! Did I just get a lemon? Is my model a pile or junk? How is UScutter with their waranties? I have so many projects I want to cut! I begged for a cutter for almost 2 years.

vinyl is free, no problem tested the blade on post its and it cuts through one just fine

It is not happening in one spot of the cutter positioning. Such as for the word 'keep' it runs in the direction the roll comes out. All of the letters in that word pass over the same spot as the vinyl unrolls, it just cuts them all differently. US cutter MH721-MK2 Orcal matte finish vinyl Blade is a year old, but honest I have never been able to use this machine like I want to (something always goes wrong and I quit) Is the cutting strip the piece of white tape like stuff just after the rollers? It does happen in different spots all over the cutter. I haven't seen a pattern yet, but there may be one. Thank you all for your time. I just want to enjoy doing this so much!

How do I check if my cutting stip is level? (I know I'm showing a great lack of knowledge here)

tried a different camera and I still can't get it visible enough to send. Sorry.

It's not coming through in a way it can be seen. The best example I can explain is that I have the word 'keep' in a very easily weedable font. The 'k' is almost just there on the surface. The 'e' is fine and the next 'e' is not there at all. The top of the 'p' is just about through but he bottom is not. These letters are in all caps right next to eachother and about 2 inches tall. Where am I going wrong?

I just got those answered but hadden't time to post it. I haddent selected them both in the left side of the cutter menu. Now that's all fine, but I'm having pressure issues. It will cut 1/2 of the word fine and then the other half not at all. I thought it was just a matter of advancing the blade but that didn't fix it. What pressure should things be set at? Is it supposed to change over time?

Also it I can't remember how to uncheck the save space button. It is all spaced to layout, I don't want it condensed this time.

I have one image I vectorized and broght into signblazer. I have several lines of text that I created in signblazer. When I click cutter it shows only the vecotor image in the bottom corner and none of the text. HELP! This is for a wedding tomorrow!

I opened the file that cowboy_1_831 put together for me right when it was posted, but I didn't try to cut it until now. It is a perfect file, but I am doing something imperfect with my cutter. It cuts the first row great and then when it starts the second row it didn't roll down enough and so it cut it on an overlap. It did that with the one I sent as well, but I thought it was just a fluke. I have waisted so much vinyl on this project! Please give me any advice you can.