Double A

Ill give that a shot i was actually thinking bout doing that also but what just unsure about it

thats the problem it is in the back holder position but still wiggles lose if not completely tightened all the way

THANKS FOR THE TIPS just been having a problem with the cutter holder staying in one spot. when ever i do a big decal/graphic it tends to slide up and not cut completely through. the only way i can prevent it it to tighten it all the way and almost feels like im going to break it. thanks for that tip im still learning the softwares and learning more everyday

looks sweet!!!!

1. Thats how my buddy wanted it so that what he got and he did the install so the dot above the j might have came off of something 2. it looks alot better out in the day light and you can notice it alot better. Also i might do a bigger one with brighter colors soon to get more noticed

Did some quick work for my car and first attempt at layered vinyl

Basically i need help pricing these out 6x24 Basic letting for a window of something 7.5x42 Basic lettering on the side of a trailer x2 any help would be greatly appreiceated

Those look sweet

Where do you get your vinyl from locally?

Did another today!! I'll get another once installed on back window

The only problem I'm having Is learning sign blazer and inkscape. I think I'm figuring them both out slowly and my cutter keeps cutting through the vinyl all the way Other than that I think in getting the hang of it and trying to do more complicated stuff everyday

Im in champlin trying to figure out this whole Viynl cutting thing

What the best software for creating basic Lettering? Looking to do the side of a truck and trailer free is always better but what would some of you recomend? Or where do most of you create your text?

Thanks got it working

alright my first issue is that my signblazer is connecting to my cutter and my uscutter 871 isnt listed

The stuff I bought just isn't working at all What is the best to use? I'm painting lexan RC bodies with rattle spray cans and possibly airbrush in the future

I used that stuff too but I'm looking for very crisp edges and a very clean paint job I do still use it in some stuff Hey guys what's the difference in punched roll of mask and not punched?

Thanks I'll check those out

got a link to that product?

Bought this stuff http://www.uscutter.com/index/page/product/product_id/1614/category_id/51/product_name/GreenStar+7000+UltraCut-II++Stencil+Adhesive+Backed+Material+Reusable+8.5%22+x+11%22%2C+36pk But the paint bleeds under the mask Also tried some vinyl but leaves to much residue underneath after I'm thinking bout the oracal 811 masks

Thanks for all,the help ordered all my stuff today I'll let you knowmhow the first vinyls turn out

http://www.uscutter.com/index/page/product/product_id/2005/category_id/3/product_name/USCutter+MH-Series+Vinyl+Cutter Looking at this model in the 28" With stand. Just looking for a basic one to start with because this will be my first This cutter will be mostly used for cutting paint masks out to paint rc bodies. Then most likely shortly after that very shortly starting to print vinyl stickers or banners for people. Any help would be greatly appreciated Best Material for paint masks? etc.

http://www.uscutter.com/GreenStar-7000-UC-II-Stencil-Material-Assorted-Sizes-GS7000UCII-15 http://www.uscutter.com/index/page/product/product_id/1614/category_id/51/product_name/GreenStar+7000+UltraCut-II++Stencil+Adhesive+Backed+Material+Reusable+8.5%22+x+11%22%2C+36pk Is this something that you were talking about?

Thanks for the info and wow your setup looks great. Hopefully I can get to that point someday...... Would you have any suggestions on vinyl or material on us cutters website?? Looking to possibly purchase tomorrow night and wAnt to order everything at once