Namchief

Members
  • Content Count

    25
  • Joined

  • Last visited

Community Reputation

1 Neutral

About Namchief

  • Rank
    Member
  1. Namchief

    Transfer Tape Question

    I agree I use Rtape for stuff that might sit for a bit and for installs that involve wet install but love the clear with multi color and imediate install. The clear is less sticky but love it.
  2. Namchief

    Best Chrome vinyl?

    use a new blade it will help with crappy cuts
  3. I saw both but for WI atv need at least 4x7 1/2 inch white. any other suggestions for source?
  4. It didnt attach the pic prolly my error so here it is.
  5. As topic states I am looking for white 4x8 inch blank license plates. Attached is what I am looking for. Thanks Eric
  6. Namchief

    USCutter Driver Pack

    New Link http://support.uscutter.com/index.php?/Knowledgebase/Article/View/77/28/flexi-driver-pack-uscutter
  7. Namchief

    Non slip cuttable vinyl

    Looking for the material that they make the non slip decals that they sell for the bottom of bathtubs that I can load into my copam cutter 24" and cut into custom designs. Thanks
  8. Namchief

    120cc Snowmobile

    Converted this 120 polaris into a Yamaha (sort of) for a friend sorry about the pics crappy camera phone. oh and the caveman pic is because we ride Vmax-4's and were told that we rode dinasoars so that is the race team Caveman Racing. This is the Hood for a 1 cylinder 4 stroke snowmobile with very little HP where her fathers sled is a 2 stroke 4 cylender with 450 HP. I am now ready to attempt mirrors and other fine detailed work as I figured out all of my issues which included the chatter cut, the perforated cut, and the lifting of the vinyl.
  9. Namchief

    My Copam 24" tracks terribly on long jobs...

    Wow almost a year old but going to add my .02 worth.... Yes the pulling on a 50 yd roll or even 30 yard roll might bull the tracking off. But if you have the roll way misaligned a 5 yard roll will do it. In other words make sure the roll is exactly beneath the output of the machine. This will aid in keeping vinyl in line.
  10. Namchief

    my version of the big sqeegee

    I know this post was about 18 mths ago but holy crap did this work as explained Thanks I owe ya one
  11. Namchief

    SignCut Crashing and not showing images

    Had a really nice typed out answer describing how to ask for help and not say crap like "IF YOU READ MY POST" WITH OTHER POSSIBLE SOLUTIONS BUT NOW MAYBE NOT...... tried on old puter with cs3 on it and everything worked fine with the same image that cs5 SAVING IN LEGACY 8 didnt like
  12. Namchief

    SignCut Crashing and not showing images

    Signcut can not read the CS5 format of .ai or .eps save it into a legacy version I use 8 as a always works option. Hope this helped
  13. Namchief

    Need help

    Try this. the pdf was nasty didnt even try the the ai but my guess is that your file is in a newer version of AI than your cutting or vector software recognizes. beeantler.eps
  14. Well this was easy as soon as I was told by the support to use parallel port db25 instead of the usb. I purchased a Trendnet printserver tew-p11G from tigerdirect used the wizard and noted what ip address it was using and made it static. the printserver was hooked up to my wireless router that is running dd-wrt not sure this was important. Went into SignCut Productivity Pro and set the outsource device/Port to TCP/IP and put in the ip address to the print server. I left the port of 9100 alone. did a test feed I could hear it then cut out my first decal from my laptop while sitting on the couch to my cutter in the other room. WOOOHOOO!!!!! hings you will need to order 1 network cable to go from print server to router, 1 DB25 male to DB25 male to go from print server to cutter. and the parallel port print server. I chose the one mentioned above because I have a regular printer in there as well and can use the usb for that. I hope that others can get theirs setup as easy as this attempt went as there is no documentation anywhere on this site about wireless cutting but the advertisement for the Copam 2500 says it can cut wirelessly. and Yes it can . Enjoy the instructions I hope they help someone. I am going to try to map a lpt port to an ip address next that way sign blazer and other software will be able to be used wirelessly
  15. Well this was easy as soon as I was told by the support to use parallel port db25 instead of the usb. I purchased a Trendnet printserver tew-p11G from tigerdirect used the wizard and noted what ip address it was using and made it static. the printserver was hooked up to my wireless router that is running dd-wrt not sure this was important. Went into SignCut Productivity Pro and set the outsource device/Port to TCP/IP and put in the ip address to the print server. I left the port of 9100 alone. did a test feed I could hear it then cut out my first decal from my laptop while sitting on the couch to my cutter in the other room. WOOOHOOO!!!!! hings you will need to order 1 network cable to go from print server to router, 1 DB25 male to DB25 male to go from print server to cutter. and the parallel port print server. I chose the one mentioned above because I have a regular printer in there as well and can use the usb for that. I hope that others can get theirs setup as easy as this attempt went as there is no documentation anywhere on this site about wireless cutting but the advertisement for the Copam 2500 says it can cut wirelessly. and Yes it can . Enjoy the instructions I hope they help someone. I am going to try to map a lpt port to an ip address next that way sign blazer and other software will be able to be used wirelessly.