D.Schulz14

Okay will give it a try from that link and see what it does Might not be for awhile. Laptop is flat and I'm over it haha

Yeah seems that way. Is there any way to actually identify what it is? Like if I pull the mainbaord out or something along those lines. Appreciate the help also thank you Apparently my trial has expired for easy cut. Don't recall ever having it on this laptop but owell

Okay signcut has what looks to be the right cutter. Now I just get the can't communicate with closen device.. Correct com port selected and tried a few different baud rates. Unplugged and replugged it a few times comes up for com4 each time and still showing ftdi drivers installed Edit - reinstalled the drivers now it shows the progress bar briefly then dissapears but not response from the cutter.

Okay will have a look. The one thing is if I choose the creation pcut cr1200 in flexi it doesn't give any com port options in the drop down box only pcutusb and a few other random things nothing that's a com2 com4 etc Will try signcut

Okay tried with signblazer. Still nothing. Cutter shows in device manager as com4 with the ftdi driver install version 2.12.16.0 In that signblazer there is only the option for a pcut ct630 so not sure if that would work anyway

Okay fair enough I will give sign blazer elements a go

It did not basically I gave the seller my laptop and he installed the FlexiSIGN Pro 10.5 onto it and told me it would work now. It powers up and the fan runs and after going thru the buttons and lcd screen menu I could make it cut little squares so I guess that is the test cut. I've tried many different drivers but your confident it's a ftdi chip? I'll pursue that path more thoroughly if it is. Haven't tried any other software as yet

Hey, Kind of a last resort to be posting here. Bought this off a sign shop as a working machine with software and have had no joy getting it to do anything. I'm pretty around usb to serial convertors etc coming from a aftermarket ecu background so I'm pretty confident I can assign a port correctly etc Basically I've read lots and lots of info for setting these up and I'm not having any joy whatsoever. I've tried many many many driver combos and setups in flexi with no joy. In device manager everything comes up like it should. But there is somethings that on the machine that are different to any of the tutorials I can find or examples I've read. There is no way of viewing or changing the baud rate on the cutter like is mentioned in nearly everything I've read. There is no serial port only usb. ( I assume it has a built in converter inside) Can send the Job to the cutter and flexi will hang on 7% or 100%(most of the time can be any random %) working with no response from the cutter. Some driver and setup combos have the cutter show "working usb" once the job is sent but still nothing at all from the cutter. Short of pulling the whole damn thing apart to view the chip so I confirm 100% the correct drivers are installed I'm not sure where to go.