Raj _108

Just wanted to say thank you to everyone that gave me the advice to sort out the issues I had with the software. Finally got the job done and to the correct scale. Thanks once again. Raj.

No worries. Thanks for your help. Raj

Many thanks for your advice. I am back in the office tomorrow morning. I will let yiu know how I get on. Wish me luck!. Many thanks once again. Raj.

Many thanks for your advice. Please look at the image of my current default job properties. It is set to 40.00 steps/mm - is this the reason for the artwork cut oversized? I take it, I can address the knife offset issue in this panel? Kind regards Raj.

Many thanks for your words of wisdom. I'm looking forward to the screen shots as i'm desperately trying to get the job completed. I would really appreciate it if you could also send me some screen shots of the offset blade settings so that I can tweak it and hopefully i can get the final cut to join the line. The last thing I want to do is make matters worse. The software and plotter has never given me these issues before, so I've not had to adjust these settings in the past. Apologies for not having any visuals to show. Thanks once again.

Many thanks for your advice. The machine is pulling from the roll but there is no tension which would suggest the pulling. Nevertheless, it is a good call and will try taking the vinyl off the roll and see if that makes a difference. Thanks once again.

Hi Everyone, I have a Liyu SC 1261 and using Flexicut Cloud 11. I have come across two major issues which are new to me as I have never come across them before. Firstly, the cut size on the vinyl is slightly larger than my artwork. I have adjusted the panel size so it is the same size as the artwork but when I send it to cut using flexi, it still seems to be slightly larger than the original size. Any ideas as to what the problem is and how to resolve this? Secondly, the cuts around my weed border are not joining together as they should. So if you can imagine a rectangle and the last cut line is skewed and not completing the shape. Sorry haven't got any images at the moment as I am not in the office at the moment. Had a few frustrating days and just cannot figure out what the issues are. To top it off, I ended up cutting out the vinyl for a job, applied the release tape to them and found out they didn't fit the magnetic sheets. I would really appreciate it if anyone could kindly shed some light on these issues and help me resolve them. Many thanks in advance. Raj.