Cjay

I print the registration marks on to the paper/sticker with my printer and then I put the printed paper/sticker into the cutter and trying to do the contour cut with ARMS. I don't understand how can the registration marks goes together with a cut as the registration marks are has to be printed and my cutter isn't print it is only cuts. It's probably just my incompetence, but I don't really know what you mean to send the registration marks together with the cut

Hey Guys, I'm a newbie in the cutters world. I have a Graphtec CE-Lite 50 and cannot get on with a contour cutting. I use Corel Draw & Cutting Master 4. I open the image in corel draw, I make a boundary to get a contour around my image, put a registration mark on too and then I copy the contour to a new tab. I print the image from corel draw including registration marks. Put the printed sheet into the cutter set everything up, the machine scans and sees the registration marks as well. I send the job the copied contour to the cutter to do the cut and it does the contour cut perfectly but the cut is slipped off the print for some reason. It doesn't cut the printed image around it does the exact same shape but slipped off the image a few millimetres... I have literally spent my whole day to try to figure this out, but I couldn't get on with it. Any help would be much appreciated, because I have absolutely no idea how to sort this out. Thanks in advance