Ang7399

Members
  • Content Count

    16
  • Joined

  • Last visited

Community Reputation

2 Neutral

About Ang7399

  • Rank
    Member
  • Birthday 08/08/1981

Profile Information

  • Gender
    Female
  • Location
    Rochester, NY Area
  1. Ang7399

    Easy Cut Studio plotter install

    Sorry, disregard, they have the plotter listed under a different manufacturer. All is right, for now! Thanks!
  2. I downloaded, installed and activated Easy Cut Studio with no issues (after checking their list to make sure that my plotter was supported). I go to add my cutter - NOT on the list. I'm on Mac Mojave with a Vinyl Systems Specialist 24/28" plotter. Software appears to be working correctly. I'm in a pinch because my laptop that was previously running my software (what it came with) literally died yesterday, and of course this is my busy season, and quickly getting backed up to my eyeballs... so any help will be greatly appreciated! Thanks, Ang
  3. Ang7399

    Used plotters

    I am looking for a vinyl cutter
  4. Ang7399

    Used plotters

    The brand i found was one I've used before. I was just asking for more info from the seller, they both listed 'sign shop supplies' and I asked if they had a plotter they were selling, the one listed was an hp. I opened up the side of the plotter and looked around, there was one wire that was touching a screw so I bent it out of the way, but everything is glued in place so it doesn't come loose. But it's working for the moment. I'm not sure what it could be. My electrical in my house is old so my husband suggested it was that? I tried another outlet for now, we'll see how it holds up
  5. Ang7399

    Used plotters

    I've already checked the kill switches, the head isn't anywhere near them and they are not pressed in. If there is a part I can get, I'd rather do that! Is the support team avail on weekends?
  6. Ang7399

    Used plotters

    I found 2 options maybe on Craig's list in my area, just waiting for a response.
  7. Ang7399

    Used plotters

    I have a creation p cut table top. I posted a few months ago about the screen display not working. Well I got it back up for a day. Now it's not responding again. The display is flickering on and off, so I'm thinking electrical. The guy I got it from said he had some issues with it doing this before, but he just turned it back off and on again and it was fine. Not so much anymore! And I'm in upstate NY, and would be willing to travel around my area a bit to pick one up.
  8. Ang7399

    Used plotters

    Does anyone sell used plotters? I'm not sure if this is allowed, but I'm looking for an inexpensive plotter that works. I do part time out of my house, so a 15" or 24" would be fine. The one I have has finally died on me.
  9. Ang7399

    Creation pcut

    Thanks!! I have already tried all that so I may have to contact support then... This is a 'new to me' machine that I've only had for like a month. So I haven't really even 'broken it in' even thought it's probably as old as me.... Hopefully it's still good
  10. Ang7399

    Creation pcut

    Do they charge for troubleshooting?
  11. Ang7399

    Creation pcut

    Hi again! I've been using my pcut for a few months now, I have several orders in and the thing crapped out on me! I was cutting yesterday and I left the room for a minute and when I came back in it had stopped. When I looked at it, it had only cut half of the image. I had 2 images I was nesting. A person, and a straight line, both about 15in long. It cut the person but as it was going back to the top to cut the line it hit the red stop button on the side. The display said 'waiting'. I've had this happen before and all I did was turn it off, move the head back a little and turn it back on. But when I did it this time the screen was blank when I turned it back on and none of the buttons work. I tried sending another file to see if that would help, nothing. I left it unplugged over nite to see if that would reset it, nothing. Any help you guys can give would be great! I have 2 jobs due this week that I gotta get out and this is my only plotter
  12. Ang7399

    Sign blazer with creation pcut

    That was it!!! Up and running Thanks guys!!
  13. Ang7399

    Sign blazer with creation pcut

    Ugh autocorrect... Different cable not dog (?) also where can I get the driver? I didn't see it as part of my download.
  14. Ang7399

    Sign blazer with creation pcut

    So what am I doing wrong? Do I need a driver and/or a dog cable? The person I got this from had the same setup as me and he said it worked fine.
  15. Ang7399

    Sign blazer with creation pcut

    Yeah I only have a usb plug for it. And when I was going thru the install I told it usb connection. Now that I've deleted my printers when I go to set up it does t give me the option of a USB port.