duck1973

I am looking for someone to print a few items for me. These graphics will be placed on an outdoor sign and a window that I install. Where do I post looking for that service? If here is ok, then is there anyone interested? The graphic is a 3 color graphic. Thanks in advance!

Well I gave the gentleman a quote for $425 with 751. As I figured it was way higher than he expected. After looking at my materials and time I would really hate to do the job for any less. He said he was going to hold off for now but I will be surprised if he doesn't go pay half that for a low quality vinyl. We will see.

It is a lighted sign but he said it won't be lit. The plexiglass is a white plexiglass and yes it will go outside. The vinyl will be cut in two pieces but no overlapping will be needed. Also I will not have to remove any vinyl from plexiglass. I will basically cut, weed, tape and apply and walk away. The weeding will be very easy on this.

Ladies and Gentlemen, I have an acquaintance who has asked me to put his logo on a 4'x8' sign on both sides. He has provided me with the graphic and it was cut ready in under 15 minutes. It is one color and will end up being approximately 42"x90" of vinyl per side. I was going to price 651 and/or 751 to him. The logo is a very simple logo with lettering. I will have to cut in two pieces. He has the plexiglass panels out of the sign and in his shop for an easy install. What would you recommend on price? I have used the calculator and came up with $707. Seems pretty steep for the job but haven't done a job like this before. Thanks in advance!

Thank you very much! Much better than what I was getting. Thanks again, Darren

Can any of you get a good vector of this picture? I have tried and cannot get a good one. A friend had sent it to me wanting to use it for a "In Memory of" sticker. Thanks in advance! Darren

Thanks for the file! Appreciate it.

I downloaded too. Thanks a bunch!

Simpler gf! I like that however this one actually brings me beer without even asking. Maybe I can talk her into a 'better' tree!!!!

Well I got to say I got in over my head with this. My girlfriend wants a tree on her wall. I thought no big deal I can do a tree, then she shows me this picture. This is the tree she wants and I can't do anything with it. Is there anyone here willing to help or have the time to help try to vectorize this? I understand if not. I have played around with the graphic for 2 days and not liking anything that I have done to it yet. Thanks in advance to anyone who might have the time to try!!! duck

Yep these people popped around my area in central Kansas. They might make some quick cash but sooner or later just like a bad drug deal it will catch up with them.

Where do I check for easy weed? I have it set to cut a weeding border as I always have but it always left a whole piece around the graphic.

I use Corel X4 and a Graphtec CE5000 cutter that I have had nothing but positive things to say about. However recently when cutting graphics--the outside line touchs at any high or low points on the graphic. Not a big issue other than weeding. So anywhere the cut touches up to the graphic there is a break in the scrap piece. Not sure I am making this sound right but maybe someone will understand. I am sure there is a setting somewhere that maybe got changed on accident or something. Can anyone help? Thanks, Darren

Perfect. Thank you!!! Gonna put it on my son's wall and a nightstand! He's gonna love it almost as much as I do.

Can any of you do anything with this graphic? My dad and I both worked on this and cannot get it looking good. Any help would be appreciated. Thanks! prop biplanecrop.bmp