Ariti 2 Posted October 4, 2008 Hello, Has anyone used the Metallics by Hot Fix. I cut the design with the dull side up. Weeded it. Set the heat press at 320. Pre heated the shirt. Then I pressed the design with the metallic side down clear lining side up teflon sheet on top for 15 seconds. The metallics stayed adhered to the clear lining. I repeated the process now the metallic is pressed to the clear lining. Does anyone know what I did incorrectly. I would appreciate any input. Thanking you inadvance, Ariti Share this post Link to post Share on other sites
Benr98 40 Posted October 4, 2008 Hi girl.........I haven't tried it yet. But did find these instructions for Hot Fix Metallics:..hope it helps ya. Application Instructions: Remove vinyl liner Cut design in mirror (reversed) image. A 60-degree may be required. Pre-heat press to 320-degrees F. Cover PermaChrome design with a Teflon sheet and press for 10-seconds with firm pressure. Peel cold. Share this post Link to post Share on other sites
