Jeffro1122 0 Posted September 10, 2008 I've been trying to get my plotter to work for nearly 10 hours and I don't know what I am doing. I've attempted to install all the drivers that came with the Signcut - X2 software but I can't get it to work. Can anybody give me a set by step on how to set up my mac to get this thing running? Edit: I'm running Mac 10.5.4 with an intel processor Share this post Link to post Share on other sites
kenimes 42 Posted September 10, 2008 http://www.ftdichip.com/Drivers/VCP.htm You need the USB drivers from the link above. Responded to your T-Shirt forum post as well. Share this post Link to post Share on other sites
PopDog 0 Posted October 26, 2008 honestly, this driver needs to be posted somewhere more visible.. I was in the same situation as the original poster.. I was 8 hours deep, and couldnt get signblazer to work on my winXP machine... then I read this, and saw it was a similar issue so I clicked the link and saw the xp version of the drive, and what do you know? it worked. Share this post Link to post Share on other sites