Popeye 0 Posted August 21, 2008 As not wanting to bust anything... what's the SOP for removing the end covers on a Pcut 630?? Thanks Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted August 21, 2008 There are 4 screws that are on the inside (the black part). 1 is under the top cover that just flips up from the front. when those are removed the sides just come right off. I don't remember ano on the bottom but you might want to chack Share this post Link to post Share on other sites
kenimes 42 Posted August 21, 2008 There are 4 screws that are on the inside (the black part). 1 is under the top cover that just flips up from the front. when those are removed the sides just come right off. I don't remember ano on the bottom but you might want to chack Also 2 screws on the outside of the case that need to be removed as well as the 4 inside. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted August 21, 2008 oops - forgot about those . . .sorry Share this post Link to post Share on other sites
Popeye 0 Posted August 21, 2008 Got it.. found'em and that was great fun Nothing wrong with the machine.. slow day Share this post Link to post Share on other sites
Popeye 0 Posted August 21, 2008 Just fine tuning my skill sets.. LOL Share this post Link to post Share on other sites