problems sending work to right device

[bowhunter012004 4]

basically when I click "cut"  the pcut Ctn 630 just sits there.  Now in the lower right corner the printer icon is showing.  That is my Hp 3100 all in one printer icon.  Im guessing Sign Blazer is sending the job to my printer not my cutter.  I have the correct ports set up. What else can I do from here to make the cutter be recognized by my computer for these jobs?

[firemalt 10]

http://forum.uscutter.com/index.php/topic,8453.0.html

[Guest sciondrgn]

Just like firemalt said,

Just make sure your cutter is online and connected properly, verify your com port settings, I use (Com 1 - (9600,8,None,1,hardware). Make sure that the cutter itself is set to 9600 baud as well. And in SignBlazer verify under the cutter setup that the PCUT and correct com port is selected there as well..

Let us know!

[kenimes 42]

Can you post a screen shot of your Setup window?

[cybe2028 2]

I had this EXACT problem when I started using my cutter. Make sure you are using SignBlazer Elements and NOT SignBlazer HotShot. Because HotShot is for printing, it sent things to my printers. HotShot has lips as its icon, Elements has SE as the icon.