duke 12 Posted July 1, 2008 hi all, which do you all prefer for signage on panels and glass? duke Share this post Link to post Share on other sites
pungohboy 0 Posted July 1, 2008 I just laid a 30x40 Rear window decal wet using Banner Johns homebrew recipe it went great! I would not have attempted it dry Share this post Link to post Share on other sites
firemalt 10 Posted July 1, 2008 If it's anything bigger than 12"... I would suggest using the wet app. It's forgiving unlike the dry app method, and you are nearly guaranteed to have no air bubbles. Share this post Link to post Share on other sites
BannerJohn 1,324 Posted July 2, 2008 as said. Wet. I am waiting to hear someone brag how they always do dry though. Share this post Link to post Share on other sites
duke 12 Posted July 2, 2008 hey banner john, i cannot find your famous recipe for wet app, where is it please? regards duke Share this post Link to post Share on other sites
BannerJohn 1,324 Posted July 2, 2008 for 1 gallon: 3/4 water 1/4 rubbing alcohol (NOT DENATURED) 3-4 drops dishwashing liquid sometimes I increase the alcohol percentage for coroplast. Share this post Link to post Share on other sites
Knobhill 0 Posted July 6, 2008 Interesting, I never tried alcohol in the mix. Next batch I will. Wet or dry it all depends on what your applying to and your level of experience. Newbee's should start with wet application methods and stick to small graphics until they get used to it. my2cts Share this post Link to post Share on other sites
darkdan 3 Posted July 6, 2008 I'll be that guy. Dry. You don't want him to hit 80 mph on the way home and have it peel up. Plus, what about curves, door jams, etc. Learn proper application techniques and how to squeegee and air bubbles won't be a problem. Share this post Link to post Share on other sites
firemalt 10 Posted July 6, 2008 If you squeegee a wet app job correctly, none those are an issue(customer driving too fast after the install, and/or curves). Between taking you time & doing it right, using a heat gun for possible trouble areas(also helps dry the fluid out quicker), and informing the customer... you should be good. Highly recommended to practice, preactice, practice before doing a paying job. Share this post Link to post Share on other sites
darkdan 3 Posted July 6, 2008 The only thing I do wet nowadays is layering. Edit: Spelling Share this post Link to post Share on other sites
Knobhill 0 Posted July 7, 2008 Air bubbles, water bubbles and the rest of the issues are eliminated through experience. How do you get to Carnegie hall? Practice man practice. Share this post Link to post Share on other sites
Guest sciondrgn Posted July 7, 2008 I do a mix of both. Just depends on size and what the design is Share this post Link to post Share on other sites
duke 12 Posted July 8, 2008 thanks guys, looks like wet wins, for newbies duke Share this post Link to post Share on other sites
BannerJohn 1,324 Posted July 8, 2008 no question at all,for newbees. Or for those of us who do 3-6 banners a day and want it fast and good. Share this post Link to post Share on other sites
Knobhill 0 Posted July 16, 2008 Ya John but you have the experience. Think back to when you first started. Share this post Link to post Share on other sites
BannerJohn 1,324 Posted July 16, 2008 after 3 years and 1000 or more banners ,too many coroplast to count,and window graphics, I can think of several reasons for doing wet,and I still do 99% of the time. I can't think of ONE reason for doing dry,except for bragging rights for those who think doing it dry is somehow more 'professional'.Which it isn't. Again I say...for newbees...wet is the way to go if you want a good looking end result. Share this post Link to post Share on other sites
CyberSultan 6 Posted July 16, 2008 I completely agree. Share this post Link to post Share on other sites