mtnet2000 0 Posted June 23, 2008 New PCUT owner, trying to use my pcut for the first time, and it seems to cut weaker from the right and as the blade moves to the center it starts to cut deeper?!! I try to adjust, but then it cuts through the vinyl when it gets toward the middle? How can I adjust this? Share this post Link to post Share on other sites
bk2design 1 Posted June 23, 2008 Make sure the cutting strip is pressed all the way down Share this post Link to post Share on other sites
mtnet2000 0 Posted June 23, 2008 That sounds like it makes sense, I'll try that tonight! Thanks Share this post Link to post Share on other sites
Popeye 0 Posted June 23, 2008 If it's adjusted correctly it can't cut clear through try this http://forum.uscutter.com/index.php/topic,3362.0.html Share this post Link to post Share on other sites
kenimes 42 Posted June 23, 2008 Also make sure the blade is barely exposed from the blade holder and that you use a Pressure setting of 120-150. Share this post Link to post Share on other sites