routesmith 0 Posted June 20, 2008 Hey eveyone, I am just starting to play around with Flexi 7.6v2 and cant locate the drivers in the setup. There are no creation drivers and no PNC-1000 DGI drivers. I could have sworn that someone posted a link to download them from the UScutter site or something but after several searches I cant locate them. thanks for any help you can provide. thanks Wayne Share this post Link to post Share on other sites
kenimes 42 Posted June 20, 2008 For the LaserPoint you need to select the Creation PCut CT630 DMPL. The PNC-1000 is a Roland model, but is only used for our Refine series cutters with Flexi. Share this post Link to post Share on other sites
routesmith 0 Posted June 21, 2008 Thanks Ken, but there are no Creation drivers listed, do you know anywhere I can download them from? thanks Wayne Share this post Link to post Share on other sites
Guest fivestar Posted June 21, 2008 Wayne where did you get your flexi from? Sounds like it's an OEM version for a different machine. Here is the creation drivers. Put it in the outputDrivers folder Creation-PCut.zip Creation-PCut.zip Share this post Link to post Share on other sites
routesmith 0 Posted June 21, 2008 thanks fivestar. your right its OEM. greatly appreciate it! WAyne Share this post Link to post Share on other sites
routesmith 0 Posted June 21, 2008 Thanks everyone for your help, I am now up and running in flexi... first nice thing I noticed about it is that home is where you set it not where it ends up after a cut.. Second contour cutting looks like a breeze... guess we will find out. Wayne Share this post Link to post Share on other sites
Guest fivestar Posted June 22, 2008 Wayne if you get your contour cutting working with Flexi and a laserpoint, you better post how you did it or I am gonna hunt you down man. ;D I can't get it to work with the driver I sent you. Share this post Link to post Share on other sites
NukleoN 34 Posted August 20, 2009 Bump. I wanna know too. Any luck? Share this post Link to post Share on other sites
etchworks 0 Posted September 3, 2009 What driver do I use for an laser Point 48" for flexi ?? anyone know?? Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted September 3, 2009 What driver do I use for an laser Point 48" for flexi ?? anyone know?? have you tried this one yet? Creation PCut CT630 DMPL Share this post Link to post Share on other sites
etchworks 0 Posted September 3, 2009 I will try that one, thanks. Share this post Link to post Share on other sites
etchworks 0 Posted September 3, 2009 What's the differance between the 630 and the 630 DMPL Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted September 3, 2009 scratch that idea, I found a different thread,, use driver below. , this is from thread http://forum.uscutter.com/index.php/topic,10993.0.html Select the Creation PCut CT1200 DMPL. Share this post Link to post Share on other sites
etchworks 0 Posted September 4, 2009 Thanks, I will try that one. Share this post Link to post Share on other sites
sarconastic 29 Posted September 4, 2009 A the top of the Flexi forum there is a sticky topic with the UsCutter drivers for Flexi. Just download them and follow the install instructions. Kevin Share this post Link to post Share on other sites
bindercrazy 0 Posted September 10, 2009 No Luck here.. i tried the lazerpoint and the pcut one and i get a read error for the flexi to the lazerpoint 24. I get a output error and when i change the the port that doesnt help either. It works on Sign Blazer on port 1 go figure. Dave Share this post Link to post Share on other sites
TeslaCoiled 1 Posted July 7, 2013 Be "nice" if the driver sw reference (mentioned on a few postings)referred to a "pinned" or sticky posting.I'm about to try:http://start.uscutter.com/laserpoint/cutter/driverfrom http://start.uscutter.com/laserpointfrom http://start.uscutter.com/If this gives me headaches, I'm moving to Linux;http://libregraphicsworld.org/blog/entry/vinyl-cutting-on-linux-the-real-dealhttps://www.google.com/search?site=&source=hp&q=linux+vinyl+cutter+software Share this post Link to post Share on other sites
Country Junkee 6 Posted November 20, 2013 I might not be in the right place but I am in the middle of a job and need some help....my laserpoint just went nuts went I select to cut after creating my design it goes to the end and just bumps back and forth does anyone knw what might be going on?? Share this post Link to post Share on other sites