Dhuff 0 Posted June 13, 2008 Are there any exploded drawing or manuals showing how to replace the pinch rollers? I am actually adding two as the vinyl I cut slips on long runs. Share this post Link to post Share on other sites
ff-extreme 6 Posted June 13, 2008 Its really pretty easy should take less than 5 min. Remove a screw and slide them in. I have a copam and if yours works the same You are going to want to remove the magnets. Thats how the cutter reads the ends of the vinyl by detecting the magnets when it measures, so you don't want the magnets in the center rollers. I would contact Ken for a full explanation on how to do it. Share this post Link to post Share on other sites