darcshadow 1,626 Posted November 15, 2021 Just a bit of a rant, something that has bothered me for awhile on the forums. People keep using the term Driver incorrectly. A device driver allows the machine to talk to the Operating System of your computer. Drivers have to be installed and are rarely included in software such as VinylMaster, SignBlazer, etc. What you are selecting in those programs is the communication protocol, and any unique commands that the cutters use. So for example. If you are using the serial port of a cutter, you don't need a driver for your cutter. You need a driver for the serial port and the commands to control the cutter are determined by the cutter selection in your software. 1 Share this post Link to post Share on other sites
slice&dice 2,450 Posted November 15, 2021 I always thought a driver was THIS --- Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted November 15, 2021 2 hours ago, slice&dice said: I always thought a driver was THIS --- Oh silly slice - no beemers here - its mopar or no car 1 Share this post Link to post Share on other sites