xdesign305 3 Posted January 26, 2021 Hello everyone! I have this issue and I have been dealing with Alek with uscutter via email but I'm getting no where. When I go to contour cut wizard, I set everything up correctly. I'm printing on a letter size printable vinyl. Unfortunately, there's a dotted line around the 10.3" that anything that's below that will not print out. I have letter size selected on my printer, but for whatever reason it does not print correctly. That only happens when I select "print direct" and select my printer. If I select Microsoft print to pdf that dotted line goes away and it gives me the full 11". Not sure if this is more of a printer driver issue and not software related. Oh by the way I'm using Vinylmaster DSR. Hopefully someone here has come across this and solved the issue. Thank you Quote Share this post Link to post Share on other sites
bikemike 711 Posted January 26, 2021 If you are trying to contour cut that, you can't. I don't use VM, but there is no way it can cut that without it going out the front and off the rollers. The dotted line is probably giving you the max it can cut on that size. 1 Quote Share this post Link to post Share on other sites
xdesign305 3 Posted January 27, 2021 I do love a challenge lol! Quote Share this post Link to post Share on other sites