MZ SKEETER 4,709 Posted September 13, 2020 Is this the same Graphtec CE 6000 that you had problems with in 2019? And the same very thin Stalhs Sports film vinyl? Share this post Link to post Share on other sites
Nikolay 0 Posted September 13, 2020 48 minutes ago, MZ SKEETER said: Is this the same Graphtec CE 6000 that you had problems with in 2019? And the same very thin Stalhs Sports film vinyl? yes , same. But i was not working since 2019. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted September 13, 2020 That vinyl is so thin, it would not take hardly any blade to cut it or force. Is this the same stuff? Contact Graphtec. Or Stahls. (Stahls shows cutter guide lines on the page for a Graphtec.) I don't know anything about this material or how it will cut. Maybe some one else has cut it before. You had many problems with it back in 2019. https://www.stahls.com/heat-transfer-vinyl-sportfilm-lite Material Specifications Composition: Polyurethane (PU) Carrier: Frosted, Pressure-Sensitive Thickness: 100 microns/.10mm Stretch & Rebound: 3 Washability: 50 Safety: CPSIA Certified Laser cutter compatible Share this post Link to post Share on other sites
Nikolay 0 Posted September 14, 2020 it is 90 microns and veeeeeerry elastic. Name : Sports FIlm I have 150 microns , 0 elastic Name : Subli stop and 80 microns 0 elastic. Name : Premium Plus Problem is same for every Vinyl, uncutted corners. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted September 14, 2020 9 minutes ago, Nikolay said: it is 90 microns and veeeeeerry elastic. Name : Sports FIlm I have 150 microns , 0 elastic Name : Subli stop and 80 microns 0 elastic. Name : Premium Plus Problem is same for every Vinyl, uncutted corners. Graphtec is your tech support. Contact them. We are volunteer users here. Share this post Link to post Share on other sites