DeniseS 0 Posted July 7, 2020 Help! We use a Graphtech FC8000-130 plotter, and it became disconnected from production manager (through FlexiPro). This has happened before and I was able to get it working again, after much frustration, but this time, no go. I am sending test cuts to it (words like cut/help/etc), nothing complicated, and what happens is just a long stretch of numbers/letters being cut out, very tiny. I've done resets, re-installs, unplugged the USB, restarted the computer, and nothing works. In all likelihood, I'm missing a very simple step. Would appreciate any help. Naturally when the plotter isn't working, we get a job that requires the plotter, which is what has since happened today. Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted July 7, 2020 Sounds like you have the Command on the wrong command. Flexipro is Command HP-GL. Any Graphtec software is Command GP-GL (Graphtec Language) 2 Share this post Link to post Share on other sites
DeniseS 0 Posted July 7, 2020 1 Million Thank Yous! That did it! Share this post Link to post Share on other sites