Sniperwolles 0 Posted June 17, 2020 I have got this Plotter from a friend but I can't find any driver for this plotter? Can anyone help me? Share this post Link to post Share on other sites
Wildgoose 4,200 Posted June 17, 2020 There may be another product identifier on the back or the bottom somewhere. I'm not having any luck with the numbers and name on the front panel. I used to have P-Cut 1200 but when you looked on the back it was actually built by a company named "Creation" Your cutter is probably similar. Most cutter technology is old stuff and some generic drivers may work for you. Share this post Link to post Share on other sites
slice&dice 2,450 Posted June 17, 2020 Uh, how was your friend running it? Use SignBlazer, there are hundreds of options for cutter choice, LiYu or Creation or Roland or RedSail are standards that work on many cutters from China. Who knows, maybe it's a DingTech! Just keep selecting through the list until the cutter starts responding properly! Here is the link for SBE. (disable your antivirus first, as has been mentioned a million times in these Forums)http://www.uscuttersupport.com/downloads/Software/SignBlazer/signblazer_setup.exe and maybe your setup requires the cdm emulation driver -- it can't hurt. http://www.uscuttersupport.com/downloads/Drivers/cdm20828_setup_windows.exe Share this post Link to post Share on other sites
darcshadow 1,625 Posted June 17, 2020 Does the plotter have a serial port? If so, you wouldn't need a driver, just a way to talk to the serial port. Share this post Link to post Share on other sites
Sniperwolles 0 Posted June 17, 2020 4 hours ago, slice&dice said: Uh, how was your friend running it? Use SignBlazer, there are hundreds of options for cutter choice, LiYu or Creation or Roland or RedSail are standards that work on many cutters from China. Who knows, maybe it's a DingTech! Just keep selecting through the list until the cutter starts responding properly! Here is the link for SBE. (disable your antivirus first, as has been mentioned a million times in these Forums)http://www.uscuttersupport.com/downloads/Software/SignBlazer/signblazer_setup.exe and maybe your setup requires the cdm emulation driver -- it can't hurt. http://www.uscuttersupport.com/downloads/Drivers/cdm20828_setup_windows.exe My friend got it also from family and can't get it work Share this post Link to post Share on other sites
slice&dice 2,450 Posted June 17, 2020 1 hour ago, Sniperwolles said: My friend got it also from family and can't get it work You should be lucky in getting one of the choices in SignBlazer to fire it up. My bet is on RedSail. Let us know! Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted June 17, 2020 If you look that model name up it shows a Seiki, but the control panel is located different place. Not the same That Yaktrading no longer has that domain. Nothing. But the name of that cutter is Cutting Plotter Schneideplotter TSP 720 de decoupe Tutorial yaktrading.com I found on youtube. That control panel looks like a REDSAIL Here is a REDSAIL 1 Share this post Link to post Share on other sites