PM-Performance 21 Posted June 6, 2020 I hope this helps anyone looking at these initially. I will be adding a new series with working with this unit and its strengths and weaknesses as well as tips and tricks down the line. Share this post Link to post Share on other sites
slice&dice 2,450 Posted June 6, 2020 The cat loved the box! I have my cutter set up so that the rollers are out in front, makes for easier loading of heavy full rolls of vinyl. USCutter sells a media catch-basket for $30. When loading a blade, take apart the entire holder, add a drop of sewing-machine oil in the hole, and reassemble. Is there a separate switch to shut off the pink glow? Verify that there isn't a protective tape covering the cutting strip. Share this post Link to post Share on other sites
PM-Performance 21 Posted June 6, 2020 Thanks for the advise on the rollers. I wouldn’t have thought about keeping them up front. yea you can completely shut off the glow. I changed the color thinking it would help view the cutting area, but it’s nonsense. ill check the strip. Share this post Link to post Share on other sites