dvddvd 14 Posted May 2, 2020 I have Vinylmaster DSR and found a solid colour elephant graphic in the clip art. Quote Share this post Link to post Share on other sites
dvddvd 14 Posted May 2, 2020 I want to make a outline around it so the centre will be the tshirt colour. I used the outline tool and it looked great but when i sent it to cutter I seperated by color But it did not just cut the black outline it seemed not to see the outline and cut the elephant shape as a solid colour? Quote Share this post Link to post Share on other sites
dvddvd 14 Posted May 2, 2020 So the red would be the actual t shirt material? It just cut the outline of the elephant and the letters? Quote Share this post Link to post Share on other sites
haumana 1,220 Posted May 3, 2020 F1 will go a long way. Select both the elephant and the red, Object > Shaping > Punch Out (Back minus Front) Quote Share this post Link to post Share on other sites
dwp99 283 Posted May 3, 2020 I used Flexisign and did the Remove Overlap. Elephant.eps 1 Quote Share this post Link to post Share on other sites
darcshadow 1,626 Posted May 4, 2020 I'm not as familiar with VM but in Inkscape if you do an outline, the outline then needs to be converted to a path. If left as just as outline the cutter only sees the original single line of the original design. While you're still learning it's always a good idea to look at your design in wireframe mode to get a better idea of what the cutter sees. 1 Quote Share this post Link to post Share on other sites