Sue2 920 Posted February 26, 2020 Need some advice...I have a customer that wants his company name LARGE on the long sleeves of hoodies.....PIA! Do you all charge extra for this type of imprint? Is there a good & easy insert around that will go all the way down the sleeve to cover the sleeve seam? TIA, Sue2 1 Share this post Link to post Share on other sites
bikemike 711 Posted February 26, 2020 I think you need to measure each size and go from there. I seem to remember it needs to go toward the front of the sleeve, but don't remember where I saw that. Share this post Link to post Share on other sites
mfatty500 454 Posted February 26, 2020 You could use a teflon pad made for sleeves and leg prints, I have also used a sock jig for sublimating socks 2 Share this post Link to post Share on other sites
Wildgoose 4,200 Posted February 26, 2020 I have a sleeve/leg press pillow that is about 6"x 18" that you can slide in most long sleeves and it keeps the seam in the underarm from causing issues. I now have a Fusion with a sleeve platen that is totally awesome if the garment has room. If it won't I use the pillow. I do not charge "extra" for it being a complicated press but definitely charge for the extra location. https://www.uscutter.com/PTFE-Heat-Transfer-Application-Pillow 2 Share this post Link to post Share on other sites