slice&dice 2,450 Posted August 20, 2019 I guess this is fairly minor in the grand scheme of things, but the LP3 has a carriage with the blade positioned on the right side, which seems to me preferable because it gets the ORIGIN point very close to the edge of the cutter throat (where the vinyl feeds). The other machines (SC2 and MH) have the blade holder on the left side of the carriage, leaving a gap from the edge of the throat, due to the width of the carriage. Share this post Link to post Share on other sites
darcshadow 1,626 Posted August 20, 2019 There a question here? Having it on the right just means that you will have your gap at the other side, the size of the cutter would still be the same. 1 Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted August 20, 2019 probably whu 24" machines have a 28" throat and lets marketing use that to their advantage too - - Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted August 20, 2019 30" Graphtec FC has a 43" throat. 1 Share this post Link to post Share on other sites
slice&dice 2,450 Posted August 20, 2019 1 hour ago, MZ SKEETER said: 30" Graphtec FC has a 43" throat. Yet the blade is on the right, right? Share this post Link to post Share on other sites
