Hamnet 0 Posted July 17, 2019 Hi all, thanks for such a great forum. my names Hammy I live in the east midlands in the UK I am a complete beginner and have brought a EH721 now its out of its box and the USB cable is plugged in and I have turned the as they look the same 721 cutter on the cutter sprang in to life but my laptop does not see it I put in the disk that came with eh721 then and that's when I ran in to problems the driver will not load so is there a driver on line that I can download I did wonder if I should download the driver for the MH71 so as I said I a total beginner so please be kind. thanks Share this post Link to post Share on other sites
haumana 1,220 Posted July 17, 2019 You computer might be 'seeing' it, but it will not appear as a printer. Look in Device Settings, under USB Ports, and it might appear there - then see what COM Port it was assigned. 1 Share this post Link to post Share on other sites
slice&dice 2,450 Posted July 17, 2019 Hammy, whazzup?!! There's a thing called USB emulation driver, cdm20828 http://www.uscuttersupport.com/downloads/Drivers/cdm20828_setup_windows.exe By the way, what cutting program are you running? 1 Share this post Link to post Share on other sites
Hamnet 0 Posted July 19, 2019 Thanks both got it working now or at least it did thismorning ow all I got to do is work out how to get vinylmaster cut to not keep wanting to cut the test cut cut the "DEMO Sample Cut" Share this post Link to post Share on other sites
slice&dice 2,450 Posted July 19, 2019 You're welcome. The question about VinylMaster belongs in the VM section of these Forums --- please post it there and use complete sentences and describe in detail what exactly you are doing. Include screen shots. Share this post Link to post Share on other sites
haumana 1,220 Posted February 21, 2021 I've answered your question in a different thread. Please just post. your issue once, and not in multiple threads, or just start one thread for yourself, and this purely volunteer forum will do our best to address your issue(s). 2 Share this post Link to post Share on other sites