pawdell 15 Posted May 2, 2019 Hello, I am getting acquainted with the CE6000-60 Plus cutter. VERY nice, but not that I have any experience in other cutters. One question I have is the tool holder mount. Before I purchased the cutter, I went to Graphtec's website and selected the CE6000 Plus model and download the manual from that page, I found instructions and an image about blade holder placement in the blade holder mount depending on half-cutting or cutting out. The holder mount in the manual, when looking overhead, looks like the outline of a number "8". The mount on my Plus model is just a single hole so the blade is always over the cutting strip. My intentions with this cutter was to be able to cut out some material. I didn't want to have to use a carrier sheet. Am I missing something or is there an optional blade holder mount available? Thank you, Paul Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted May 2, 2019 The holder in the picture is on Graphtec Europe models. and maybe some other countries. I don't even know if there is a groove in front of the cutting strip for the blade to go into on the American machines. . But that Holder is also on the newer American FC models, FC8000 and FC8600. You would have to contact Graphtec on whether they can be changed. I have never heard of anyone changing it. Share this post Link to post Share on other sites
pawdell 15 Posted May 2, 2019 Thank you. I will contact Graphtec. Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted May 2, 2019 Although this cutter is used, it would have been a great deal for that.. It does have that holder. I have a FC8000-75. The FC cutters are great vinyl cutters and he has a great price on this one. He lowered the price to $1450. I have a FC7000-MK2-75 that I gave been using since 2008, Never a problem . I also picked up a used FC8000-75 last summer for cheap. Share this post Link to post Share on other sites
pawdell 15 Posted May 2, 2019 Yeah - I may have seen the initial $1750 post before purchasing this one. Perhaps my mistake on decision, but I'm not necessarily disappointed, either. The local pickup/meeting may have swayed my choice. Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted May 2, 2019 He may have shipped it for a price, but there are also Companys that do pick up, box up, and deliver for you. Many reliable truckers need a load back from delivering. Share this post Link to post Share on other sites
pawdell 15 Posted May 2, 2019 I guess this is the case of: Get confirmation prior to purchase. Graphtec replied back (quickly), but the dual tool holder is only available on the CE6000-40 model as it is part of their Automatic Sheet Cutter. As stated above, one would need to step up to the FC8600 to do what I want to do. Thanks for the replies. Not a deal breaker, but still a little disappointing. Share this post Link to post Share on other sites