droth78

Cutter Settings

Recommended Posts

I have a titan 3 and I'm trying to cut Oracal 951M and I cant get the settings right. I've tried to slow it down speed up decrease pressure increase pressure I cant get the setting right can anyone help

Share this post


Link to post
Share on other sites

Describe what result you're obtaining that isn't right.

Share this post


Link to post
Share on other sites

my bet is on too much blade exposure before even getting more info - but slice it right we need to know and preferably see what results you are getting - 

Share this post


Link to post
Share on other sites

The first thing that you need to get correct is the blade depth.  Start here. 

To start with, you should set your blade depth correctly, by taking the blade holder out of the machine, and firmly cut across a piece of scrap vinyl, you will be cutting. You should only be cutting the vinyl and barely a mark on wax paper backing, Adjust blade to get there, Then put the blade holder back in machine, and use the force of the machine to get there, same results, only cutting the vinyl and barely a mark in wax paper backing. You should just barely see and feel the blade tip out of the blade holder. 

Start with your speed at slow, no need to go fast. 

Show some photos of your problems.  

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now