Waters

Unable to connect/ use ProCut PC-700 with SignBlazer

Recommended Posts

If someone could help that would be greatly appreciated,

Having trouble connecting my ProCut PC-700 to signblazer. Have gone through changing the com ports, updated the driver to the USB adapter, have tried all of the available cutter models listed.

When I have 'direct' selected, the initializing error comes up, with 'Use Cut Manager' selected the job is sent but nothing happens. (not really sure on the difference either)

image.png.8bd257738a68217beaec65c87f95648e.png

 

Could someone please tell me what I am doing wrong/ missing

Cheers

Share this post


Link to post
Share on other sites

I seem to recall that SBE needs Com4 or under, go into you Device Manager in Windows and manually change to something less than 5.

 

Also, why is width on a 24" cutter showing 640" 

Also, 'advance after job' doesn't have to be over 1/2-foot

Share this post


Link to post
Share on other sites
49 minutes ago, slice&dice said:

I seem to recall that SBE needs Com4 or under, go into you Device Manager in Windows and manually change to something less than 5.

 

Also, why is width on a 24" cutter showing 640" 

Also, 'advance after job' doesn't have to be over 1/2-foot

MM, metric.

 

  • Like 1

Share this post


Link to post
Share on other sites

Go with direct, cut manager is like a printer spooler, and I don't recall if it actually works correctly with SB or not. The initialization error is most likely because the cutter you have selected is not a compatible cutter with the pc-700

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now