Anetski 2 Posted February 13, 2019 Hi I have a Graphtec ce6000 cutter and I only cut phototex (original NOT opaque) but I have been using a 45degree angle blade (CB15UA-5) and they just cant do the intriquet cuts. I have now been told I need a 60 degree blade. Could anyone thatcut phototex help me which blade is the best for the original material. The blade list on the Graphtec website confuses me. Help pls. Thank you Share this post Link to post Share on other sites
bikemike 711 Posted February 13, 2019 How small is the stuff you are cutting. I only use 60 blades. Share this post Link to post Share on other sites
Anetski 2 Posted February 13, 2019 it depends. its normally shapes of different things, dinosaurs, whales etc and so many little bits on them and it just frays in the tiny spots. Drives me nuts. So do you cut original fabric? what blade do you use? I was told by another person to use CB09UA-1 but I cannot find that on the blades list. It has to be a 60 degree blade right? Share this post Link to post Share on other sites
bikemike 711 Posted February 13, 2019 Sorry, didn't realize you where cutting fabric. I back out of everything I said. 1 Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted February 13, 2019 Here is one like your using in 60 degree. Clean Cut blades have been highly recommended on this forum. I don't know of anyone who cuts phototex on here. http://cleancutblade.mybigcommerce.com/graphtec-cb15u-60-metal/ Share this post Link to post Share on other sites