Mbay114 0 Posted December 30, 2018 I recently bought a used graphtec ce6000-60 and it works great. I noticed that I don’t have a lot of the options on the cutter that I see in YouTube videos. Specifically the expand function. I tried to update the firmware and the process went as expected but I still don’t have the options. Any advice would be helpful. thanks, Matt Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted December 30, 2018 section 4-4https://static1.squarespace.com/static/5900b1a3c534a5aa8149a65c/t/597f7eb96b8f5b0625147b87/1501527742667/CE6000+Series+User+Manual.pdf Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted December 30, 2018 Chapter 4 4-4. Expand. Personally I turned my media sensor and pinch roller sensor off on day 1. No need for expand. Then you can cut right by the vinyl edge, and cut edge to edge. And no carriage measuring the vinyl at start up. Those settings are in background settings. 1 Share this post Link to post Share on other sites