mastertec 0 Posted May 16, 2008 Hi Guys! I need a little assistance on this one. I tried converting the image in Inkscape and came back with over 3200 nodes. If I use the EPS file and save it as Version 8 in Illustrator, it develops some extraneous bars when imported into SignBlazer. All I really need is the outline and the face since I going to cut it in 2 colors. Can someone offer some advice? I know the answer is staring me in the face, but you know what they say about snakes. Thanks in advance. fratlogocolor.eps fratlogocolor.eps Share this post Link to post Share on other sites
CyberSultan 6 Posted May 16, 2008 Like this? fratlogo.svg fratlogo.svg Share this post Link to post Share on other sites
Guest Terry Posted May 16, 2008 You could vector that image a ton of different ways, depends how much detail you want or solid fill. Share this post Link to post Share on other sites
mastertec 0 Posted May 17, 2008 Both examples look good guys. I had not thought about the fill to aid in the vectorizing. I'll remember that from now on. Cybersultan, your example looks like what I had in mind. I can work with both of these. Thanks guys! Share this post Link to post Share on other sites