bikemike 711 Posted August 28, 2018 I will try to keep this short. Went away on vacation for 4 weeks. Basically shut the house down. The humidity in the house went stupid high. Had a drive by job yesterday ($3) and found the left, right and condition buttons no longer worked on the keypad. Using the PC controller did. Took the right side cover off (the one with the key pad) pulled the white ribbon off the small circuit board to get the side off. Then pulled the ribbon cable that goes to the key pad, cleaned it and put it all back together. All is well and everything working just like new. No, sorry. Didn't take pic's. 2 Share this post Link to post Share on other sites
darcshadow 1,626 Posted August 28, 2018 It's always amazing how often unplugging and plugging something back in fixes the problem. ha 1 Share this post Link to post Share on other sites
MrJoel 72 Posted December 19, 2018 On 8/28/2018 at 6:12 PM, darcshadow said: Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted December 19, 2018 Seeing as your #1 button doesn't work, Have you considered using roll #2.? section 2-20. When Selecting ROLL-2 REAR SET (ROLL-2 FRONT SET) by Pressing the [2] Key Share this post Link to post Share on other sites