Reeper 0 Posted August 13, 2018 Hello people I have just bought my first vinyl plotter it's a ROHS 721PE I got this 2nd hand so didn't come with driver software I have a HP laptop with window 10 on it what is the best software/ driver I can use and links would be much appreciate. Thanks in advance Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted August 13, 2018 Welcome from the USA -= not real sure what that equates to in models that we have on this side of the pond so unsure where to send you to get the drivers Share this post Link to post Share on other sites
slice&dice 2,450 Posted August 13, 2018 Reeper, you are in luck. Your machine is likely the same as a USCutter Refine model. (MH) -- if you are using USB, the chipset driver is HERE Download and install SignBlazer Elements from this hidden folder located HERE --- try to operate it with the RedSail or Copam selected in cutter setup. By the way, as a general piece of solid advice, never buy a cutter/plotter that doesn't come with its appropriate cutting software and don't hand over a dime until you are able to see the machine run with your own eyes. 2 Share this post Link to post Share on other sites
Zabbydooba 0 Posted October 29, 2018 Hi Reeper, Did you manage to get a resolution to your problem, as I'm having the same issue as you, same cutter same problem bought second hand it's driving me crazy trying to get the system up and running Share this post Link to post Share on other sites
Wildgoose 4,200 Posted October 29, 2018 6 minutes ago, Zabbydooba said: Hi Reeper, Did you manage to get a resolution to your problem, as I'm having the same issue as you, same cutter same problem bought second hand it's driving me crazy trying to get the system up and running What software are you trying to run? Share this post Link to post Share on other sites
slice&dice 2,450 Posted October 29, 2018 2 hours ago, Zabbydooba said: Did you manage to get a resolution to your problem, as I'm having the same issue as you, same cutter same problem bought second hand it's driving me crazy trying to get the system up and running You purchased a cutter from someone, and saw it running OK before you took it, right? Since you're seeking assistance from random people on the internet, it might be worthwhile to give some more information beyond "It ain't working..." Share this post Link to post Share on other sites