Slipit1 0 Posted July 28, 2018 Help please anyone, I have been using my cutter for 1 year, I have yet to see a logo image cut perfectly. the blade depth, press - 100 and speed - 170 are all ok (very little issues with vinyl pulling up). Its the image is not transferring and cutting the exact lines and it seems to not cut exactly leaving small hairs. below are 2 logos and pics next to each of overlapping and double cuts. It seems these should be very simple to cut? It seems that it is cutting correctly on the left side but when it moves to the right it is not going far enough and overlapping? Share this post Link to post Share on other sites
slice&dice 2,450 Posted July 29, 2018 You gotta give us better details for troubleshooting. Share this post Link to post Share on other sites
darcshadow 1,626 Posted July 30, 2018 What does the design look like in wire frame mode? Share this post Link to post Share on other sites
signyouup 178 Posted August 1, 2018 Try slowing down and backing off the pressure. Share this post Link to post Share on other sites
