ThermoPuke 0 Posted June 27, 2018 I have a PCUT 630 from probably 10 years ago. Is there any update or modification that can be made to get hardware offset? The design software I got for free then has shut down due to the owner dying and there is a bug with the software offsets that I submitted but the company shut down a couple months after. What options do I have that don't involve new sofware or a new cutter? Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted June 27, 2018 What cutting software were you using? Signblazer is still a FREE unlimited trial. There are other softwares that you can purchase that have the PCUT drivers. Share this post Link to post Share on other sites
slice&dice 2,450 Posted June 27, 2018 Hi there , T-Puke. First of all, while you may have an older copy of SignBlazer that is buggy, I suggest downloading and using this version (v7.0.0 unofficially) http://www.uscuttersupport.com/downloads/Software/SignBlazer/signblazer_setup.exe The blade offset is adjustable, and it appears to work OK for me. 1 Share this post Link to post Share on other sites
Jburns 239 Posted June 27, 2018 Yep I agree. I ran a PCUT for Years using Signblazer. and used that offset shown above. edit: used that offset - window for adjustment Share this post Link to post Share on other sites