SHIRTGUY 0 Posted March 28, 2018 Just picked up a magnum force 2 cutter used for cheap, who makes this and what drivers would i use in signlab? Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted March 28, 2018 8 minutes ago, SHIRTGUY said: Just picked up a magnum force 2 cutter used for cheap, who makes this and what drivers would i use in signlab? Is this it? http://www.scmartwork.com/index.php?l=product_detail&p=179 Share this post Link to post Share on other sites
mb20music 760 Posted March 28, 2018 Your best bet would probably contacting Signlab or SCM Share this post Link to post Share on other sites
SHIRTGUY 0 Posted March 28, 2018 I have, I am waiting for a reply back.. figured it was worth a shot here It is the one in the middle here http://scmmagsupport.com/ Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 28, 2018 looks like a saga brand cutter = rebranded Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 28, 2018 I would try a driver in your software for the 720I or 720II - depending on if it is stepper or servo Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 28, 2018 Their video shows dragoncut so almost certain it is a saga Share this post Link to post Share on other sites