da5id 0 Posted January 10, 2018 I'm using Illustrator to design packaging and a combination of printers and a Titan 3 for cutting out the card stock. Currently, I've found working with SCALP 3 to be less than ideal and I don't really trust it with printing. The end goal is to print in large format on my 24" Epson p7000 and then run the printed stock through the Titan 3 to cut out the die line. I also want to use this same setup for printing and cutting stickers. What's the best workflow for doing this? Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted January 10, 2018 Welcome from michigan - a die line? this is a illustration of die cutting Share this post Link to post Share on other sites
da5id 0 Posted January 10, 2018 What I've got is the die line, the drawing for the die. In lieu of making a die (which is slow and pricey), I'm using the Titan 3 to do the cutting for me. I'm just looking for the best process here for packaging prototyping. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted January 10, 2018 ahh - will see if someone comes along with experience - most of us on here just make decals. maybe support can offer some suggestions if you call them Share this post Link to post Share on other sites