kenimes 42 Posted April 6, 2007 We have tested both models with the Roland PNC-960 driver in Flexi, and both seemed to work fine with the Serial or LPT port. You will want to set the Flow Control to Hardware, and make sure DTR in UNchecked. Hope this helps are Copam owners using Flexi. :chopper: Share this post Link to post Share on other sites
kenimes 42 Posted April 19, 2007 Recently we have found that this driver does not work on all setups, just some systems. billy has said his CP-2500 works great with the HP HPGL driver for Flexi. Share this post Link to post Share on other sites
annai 0 Posted August 21, 2007 we have a problem with cp 2500 while we try to install this with winxp sp2 we need the driver files to use this are alter solution with regards annai stickers Share this post Link to post Share on other sites
kenimes 42 Posted August 22, 2007 Which software are you using? Share this post Link to post Share on other sites
Aardy54 0 Posted March 22, 2008 Flexi Pro 7.6v2 : PNC-1000 on Com5 with the USB/serial, 9600/8/N/1/Flow =hardware/DTR-RTS-CTS checked Works everytime from a Dell Inspiron laptop Share this post Link to post Share on other sites
