Poot25 9 Posted March 15, 2017 Hey guys I have done some multiple layer files and they are off, I mean like taking 2 color with an out line I have to cut and move it on each individual word to line up, I haven't done a lot of out lined stuff so I never noticed it. Is there maybe a setting on the cutter I need to adjust for this? Thanks Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 15, 2017 what cutting software are you using? Share this post Link to post Share on other sites
slice&dice 2,450 Posted June 1, 2017 Poot, c'mon, seriously? This thread is several months old, and you had abandoned it. If you want some useful replies right now from other Graphtec users, certainly they are going to require a WHOLE LOT more info than you provided back in March. Show what you meant by layers "not lined up" (maybe post a picture with an example here). Give us something solid to work with and you might obtain a solution -- hopefully you'll stick around this time. Share this post Link to post Share on other sites
mb20music 760 Posted June 1, 2017 1 hour ago, slice&dice said: Poot, c'mon, seriously? This thread is several months old, and you had abandoned it. If you want some useful replies right now from other Graphtec users, certainly they are going to require a WHOLE LOT more info than you provided back in March. Show what you meant by layers "not lined up" (maybe post a picture with an example here). Give us something solid to work with and you might obtain a solution -- hopefully you'll stick around this time. Come on, tell us how you REALLY feel! LOL Share this post Link to post Share on other sites