mfatty500 454 Posted January 21, 2017 I don't do a lot of sublimation, but what is with the Ricoh 3110 dn going to sleep, it is always a pain to wake up to get printing? Most times I have to turn it off and re-power, is that normal, it has always done it since it was new 5-6 years ago I have done the current firmware update. Thanks Mike Share this post Link to post Share on other sites
xpaperman 719 Posted January 21, 2017 mine does that sometimes too. Usually if I am about to use it, I will just reach over and touch the on button for a sec to "wake it up" before I send my item to print. Most times that does it.... if not, I just power down and power back up and away it goes. Share this post Link to post Share on other sites
mfatty500 454 Posted January 21, 2017 I did the firmware update, it went asleep, I hit the # enter button and all seems to work fine now. I'll see how it does in the morning. Thanks for the reply. Share this post Link to post Share on other sites
GraphxNMore 282 Posted February 11, 2017 What do y'all do about blacks not being anywhere near black? I thought peeped it was due to expired ink, per customer support, so I bought 2 new cartridges. Flushed heads 10 times (they said 7), but still isn't deep black. I'm using illustrator CS6, and have verified RGB are all at 0. Very frustrating, especially when there's $500 worth of work pending. And yes, mine is sleepy a lot too. Lol Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted February 11, 2017 only time my black isn't deep enough is when I apply for too much time it will go brownish - check your time and temp Share this post Link to post Share on other sites
GraphxNMore 282 Posted February 12, 2017 It's not burnt. It's bluish to dark gray. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted February 12, 2017 Yeah that us what I experienced when too much heat for too long. . . Share this post Link to post Share on other sites
mfatty500 454 Posted February 12, 2017 4 hours ago, jep8fan said: It seems to happen on my windows 7 computer mostly, It only has 4 gb of RAM and using it with Corel Draw x7 it is slower than s**t, so I don't know if that has anything to do with it or not, on my windows 8.1 machine it is better, I'll be getting a new W10 laptop, so I'll have to try it on that and report back. And yes, mine is sleepy a lot too. Lol Share this post Link to post Share on other sites
GraphxNMore 282 Posted February 18, 2017 On 2/11/2017 at 7:51 PM, Dakotagrafx said: Yeah that us what I experienced when too much heat for too long. . . Power driver mysteriously disappeared. Tech supports thinks maybe a windows update is to blame. 1 Share this post Link to post Share on other sites
SeeJaysPlace 476 Posted February 25, 2017 mine did this when it was brand new, I called Ricoh, and I had a bad motherboard and they returned it and got me a new one and now it works perfect! Share this post Link to post Share on other sites
SeeJaysPlace 476 Posted February 25, 2017 I'm trying to sell my 3110dn and a mug press Share this post Link to post Share on other sites
mfatty500 454 Posted February 25, 2017 It was something with my older windows 7 machines, on my windows 8.1 & windows 10 it works pronto.. Share this post Link to post Share on other sites